Path: 2024-06-06_07-01-58_One-column-separation
Procedure: One column separation
Argument list:
uses_trap = False
uses_separator = True
is_isocratic = False
analysis_time = 1800
oven_temperature = 50
sample_volume = 1
sample_position = Slot2:15
presample_solvent_volume = 2
presample_air_volume = 0.5
postsample_air_volume = 1
postsample_solvent_volume = 2
sample_aspirate_speed = 5
sample_postaspirate_delay = 500
sample_inject_speed = 1
calibrant_volume = 0.6
calibrantTime = 5.65115098697118
is_calibrant_inject = False
is_extended_wash = True
is_bottom_sense = True
injection_method = uLPickup
trap = Name: Thermo Trap Cartridge 5mm, Func: Separator, ColDia: 0.3 mm, Len: 5 mm, PartDia: 5 µm, Porosity: 42 %
separator = Name: Ionoptics 25cm, Func: Separator, ColDia: 0.075 mm, Len: 250 mm, PartDia: 1.6 µm, Porosity: 42 %
separator_volume = 0.463875790256618
separator_unityflow = 0.00058605984562038
separator_equilibration_volumemultiplier = 4
separator_equilibration_pressure = 600
column_load_volumemultiplier = 2
column_load_pressure = 600
separator_equil_time = 4.05402026133927
column_load_time = 8.73945212595934
gradient = (0 sec,0.3 µL/min,2.00 %), (2400 sec,0.3 µL/min,22.00 %), (3000 sec,0.3 µL/min,37.00 %), (3300 sec,0.3 µL/min,80.00 %), (3600 sec,0.3 µL/min,80.00 %)
00:00:00.0	STARTED
00:00:00.7	pump: GetSettings() --> PumpSettings
00:00:00.7	--------------------------------------------------------
00:00:00.7	--- Log instrument settings called from: settings
00:00:00.7	--------------------------------------------------------
00:00:00.7	--- HomeSpeed: 2000; PurgeSpeed: 2000
00:00:00.7	--- PressureTrackingExcessFactor: 96
00:00:00.7	--- FlowResistanceA: 300; FlowResistanceB: 100; FlowResistanceOut: 150
00:00:00.7	--- FC_FlowFilterDepth: 5; FC_PressureFilterDepth: 0
00:00:00.7	--- PC_OutputFilterDepth: 0
00:00:00.7	--- CompressibilityFactorB: 2.29999995231628; PressurePIDNegativeResultDivisor: 1
00:00:00.7	--- ExternalZeroPressureOffsetA: 124.007247924805; ExternalZeroPressureOffsetB: 130.798812866211
00:00:00.7	--- ExternalPressureScalingFactorA: 0.0197199992835522; ExternalPressureScalingFactorB: 0.0197199992835522
00:00:00.7	--------------------------------------------------------
00:00:00.7	Lua version:		1.1.0
00:00:00.7	Lua date:			2020/01/30
00:00:00.7	--- Experiment:    Description
00:00:00.7	-------------------------------------------------------
00:00:00.7	--- Trap Column:              Thermo Trap Cartridge 5mm
00:00:00.7	---    Manufacturer:          Thermo Scientific
00:00:00.7	---    Part Number:           
00:00:00.7	---    Serial Number:         
00:00:00.7	---    Type/Material:         µ-Precolum TM Cartridge  / PepMap TM C18
00:00:00.7	---    Length:                5 mm
00:00:00.7	---    Inner Diameter:        0.3 mm
00:00:00.7	---    Particle Diameter:     5 um
00:00:00.7	---    Is Particle Pore Size: True
00:00:00.7	---    Particle Pore Size:    100
00:00:00.7	---    Is Column Porosity:    False
00:00:00.7	---    Column Porosity:       0.42 (0.0-1.0)
00:00:00.7	---    Is Max Temperature:    False
00:00:00.7	---    max Temperature:       65 C
00:00:00.7	---    Is Max Pressure:       False
00:00:00.7	---    max Pressure:          1000 bar
00:00:00.7	---    Is Max Flow:           False
00:00:00.7	---    max Flow:              9 uL/min
00:00:00.7	---    Advanced Settings:     False
00:00:00.7	---    Column Comments:       Manufacturer no: 160454
00:00:00.7	-------------------------------------------------------
00:00:00.7	--- Separation Column:        Ionoptics 25cm
00:00:00.7	---    Manufacturer:          Ionoptics Aurora 25cm
00:00:00.7	---    Part Number:           
00:00:00.7	---    Serial Number:         
00:00:00.7	---    Type/Material:         C18
00:00:00.7	---    Length:                250 mm
00:00:00.7	---    Inner Diameter:        0.075 mm
00:00:00.7	---    Particle Diameter:     1.6 um
00:00:00.7	---    Is Particle Pore Size: False
00:00:00.7	---    Particle Pore Size:    100
00:00:00.7	---    Is Column Porosity:    False
00:00:00.7	---    Column Porosity:       0.42 (0.0-1.0)
00:00:00.7	---    Is Max Temperature:    False
00:00:00.7	---    max Temperature:       65 C
00:00:00.7	---    Is Max Pressure:       False
00:00:00.7	---    max Pressure:          1000 bar
00:00:00.7	---    Is Max Flow:           False
00:00:00.7	---    max Flow:              9 uL/min
00:00:00.7	---    Advanced Settings:     False
00:00:00.7	---    Column Comments:           
00:00:00.7	-------------------------------------------------------
00:00:00.7	'Valve Drive 1' is 'ILcInjectorValve'
00:00:00.7	'Valve Drive 2' is 'ISelectorValve'
00:00:00.7	--- Seperator equil time:  4.05
00:00:00.7	--- Column loading time:   8.73
00:00:00.7	--- Sep.Length:                250
00:00:00.7	--- Sep.ColumnDiameter:        0.075
00:00:00.7	--- Sep.IsColumnPorosity:      False
00:00:00.7	--- Sep.ParticleDiameter:      1.6
00:00:00.7	--- oven_temperature:          50
00:00:00.7	--- Column viscoMix:           0.00566684100509561
00:00:00.7	--- Column flow @ 1020 bar:    0.58605984562038
00:00:00.7	--- Column unity flow:         0.00058605984562038
00:00:00.7	pump: GetSettings() --> PumpSettings
00:00:00.7	--------------------------------------------------------
00:00:00.7	--- Log instrument settings called from: Two Column Separation
00:00:00.7	--------------------------------------------------------
00:00:00.7	--- HomeSpeed: 2000; PurgeSpeed: 2000
00:00:00.7	--- PressureTrackingExcessFactor: 96
00:00:00.7	--- FlowResistanceA: 300; FlowResistanceB: 100; FlowResistanceOut: 150
00:00:00.7	--- FC_FlowFilterDepth: 5; FC_PressureFilterDepth: 0
00:00:00.7	--- PC_OutputFilterDepth: 0
00:00:00.7	--- CompressibilityFactorB: 2.29999995231628; PressurePIDNegativeResultDivisor: 1
00:00:00.7	--- ExternalZeroPressureOffsetA: 124.007247924805; ExternalZeroPressureOffsetB: 130.798812866211
00:00:00.7	--- ExternalPressureScalingFactorA: 0.0197199992835522; ExternalPressureScalingFactorB: 0.0197199992835522
00:00:00.7	--------------------------------------------------------
00:00:00.7	--- Oven temperature: 50
00:00:00.7	--- Separator: Name: Ionoptics 25cm, Func: Separator, ColDia: 0.075 mm, Len: 250 mm, PartDia: 1.6 µm, Porosity: 42 % ---
00:00:00.7	--- Trap:  ---
00:00:00.7	--- MaxPressureLimitAB: 1000 bar ---
00:00:00.7	pump: GetCurrentPressure(A) --> 340.5368
00:00:00.7	pump: GetCurrentPressure(B) --> 6.905942
00:00:00.7	pump: GetSettings() --> PumpSettings
00:00:00.7	pump: GetSetManualValvePosition(A) --> 0
00:00:00.7	-------------------------------------------------------
00:00:00.7	--- Reduce pressure ---
00:00:00.7	-------------------------------------------------------
00:00:00.7	--- Pressure channel A: 340.536773681641
00:00:00.7	--- Pressure channel B: 6.9059419631958
00:00:00.7	pump: Manualmode_Pump_constantSpeed(A, 0)
00:00:00.7	pump: GetSetPistonSpeed(A) --> 0
00:00:00.7	pump: Manualmode_Pump_constantSpeed(B, 0)
00:00:00.7	pump: GetSetPistonSpeed(B) --> 0
00:00:00.7	pump: IsIdle() --> True
00:00:00.7	-------------------------------------------------------
00:00:00.8	pump: SetMaxPressureLimit(A, 1020)
00:00:00.8	pump: GetMaxPressureLimit(A) --> 1020
00:00:00.9	pump: SetMaxPressureLimit(B, 1020)
00:00:00.9	pump: GetMaxPressureLimit(B) --> 1020
00:00:00.9	pump: GetSettings() --> PumpSettings
00:00:00.9	------------------------------------------------------------------
00:00:00.9	PID settings changed:
00:00:00.9	------------------------------------------------------------------
00:00:00.9	P: 175 : True; Pmin: -5000 : True; Pmax: 5000 : True
00:00:00.9	I: 5 : True; Imin: -200 : True; Imax: 1000 : True; IWindow: 10 : True
00:00:00.9	D: 0 : True; Dmin: -1000 : True; Dmax: 1000 : True
00:00:00.9	Result min: -6000 : True; Result max: 8000 : True
00:00:00.9	------------------------------------------------------------------
00:00:01.0	pump: SetSettings(PumpSettings)
00:00:01.0	pump: GetPumpSideState(A) --> manualMode
00:00:01.0	pump: GetPumpSideState(B) --> manualMode
00:00:01.0	pump: GetPistonPosition(A) --> 848.205093167526
00:00:01.0	pump: GetPistonPosition(B) --> 379.368466311502
00:00:01.0	-------------------------------------------------------
00:00:01.0	--- Optional Refill of Pump Heads:
00:00:01.0	--- initiated by channel A:     False, B: False
00:00:01.0	pump: GetPistonPosition(A) --> 848.205093167526
00:00:01.0	pump: GetPistonPosition(B) --> 379.368466311502
00:00:01.0	--- Piston position channel A:  848.205093167526, B: 379.368466311502
00:00:01.0	-------------------------------------------------------
00:00:01.0	pump: SetDigitalOutput(PO2, False)
00:00:01.0	pump: GetCurrentPressure(A) --> 339.4522
00:00:01.0	pump: GetCurrentPressure(B) --> 6.905942
00:00:01.0	pump: GetSettings() --> PumpSettings
00:00:01.0	pump: GetSetManualValvePosition(A) --> 0
00:00:01.0	-------------------------------------------------------
00:00:01.0	--- Reduce pressure ---
00:00:01.0	-------------------------------------------------------
00:00:01.0	--- Pressure channel A: 339.452178955078
00:00:01.0	--- Pressure channel B: 6.9059419631958
00:00:01.0	pump: GetSettings() --> PumpSettings
00:00:01.0	------------------------------------------------------------------
00:00:01.0	PID settings changed:
00:00:01.0	------------------------------------------------------------------
00:00:01.0	P: 250 : True; Pmin: -32000 : True; Pmax: 32000 : True
00:00:01.0	I: 20 : True; Imin: -20000 : True; Imax: 20000 : True; IWindow: 100 : True
00:00:01.0	D: 1500 : True; Dmin: -10000 : True; Dmax: 10000 : True
00:00:01.0	Result min: -32000 : True; Result max: 32000 : True
00:00:01.0	------------------------------------------------------------------
00:00:01.0	pump: SetSettings(PumpSettings)
00:00:01.2	--- Set pressure channel A:          10
00:00:01.2	--- Set pressure channel B:          5
00:00:01.2	--- Reduce pressure flow controlled: False
00:00:05.2	--------------------------------------------------------
00:00:05.2	--- Log PID parameter called from: reducePressure
00:00:05.2	--------------------------------------------------------
00:00:05.2	--- P: 175; Pmin: -5000; Pmax: 5000
00:00:05.2	--- I: 5; Imin: -200; Imax: 1000; IWindow: 10
00:00:05.2	--- D: 0; Dmin: -1000; Dmax: 1000
00:00:05.2	--- Result min: -6000; Result max: 8000
00:00:05.2	--------------------------------------------------------
00:00:05.2	--------------------------------------------------------
00:00:05.2	--- Log instrument settings called from: reducePressure
00:00:05.2	--------------------------------------------------------
00:00:05.2	--- HomeSpeed: 2000; PurgeSpeed: 2000
00:00:05.2	--- PressureTrackingExcessFactor: 96
00:00:05.2	--- FlowResistanceA: 300; FlowResistanceB: 100; FlowResistanceOut: 150
00:00:05.2	--- FC_FlowFilterDepth: 5; FC_PressureFilterDepth: 0
00:00:05.2	--- PC_OutputFilterDepth: 0
00:00:05.2	--- CompressibilityFactorB: 2.29999995231628; PressurePIDNegativeResultDivisor: 1
00:00:05.2	--- ExternalZeroPressureOffsetA: 124.007247924805; ExternalZeroPressureOffsetB: 130.798812866211
00:00:05.2	--- ExternalPressureScalingFactorA: 0.0197199992835522; ExternalPressureScalingFactorB: 0.0197199992835522
00:00:05.2	--------------------------------------------------------
00:00:05.2	--- Final pressure channel A: 7.22934722900391
00:00:05.2	--- Final pressure channel B: 0.181422382593155
00:00:05.2	-------------------------------------------------------
00:00:05.2	pump: GetSetManualValvePosition(A) --> 0
00:00:05.2	pump: GetCurrentPressure(A) --> 7.229347
00:00:05.2	pump: SetManualValvePosition(A, 0, False)
00:00:05.4	pump: GetSetManualValvePosition(B) --> 240
00:00:05.4	pump: GetCurrentPressure(B) --> 0.1814224
00:00:05.4	pump: SetManualValvePosition(B, 180, False)
00:00:05.8	pump: GetSettings() --> PumpSettings
00:00:05.8	------------------------------------------------------------------
00:00:05.8	PID settings changed:
00:00:05.8	------------------------------------------------------------------
00:00:05.8	P: 250 : True; Pmin: -10000 : True; Pmax: 10000 : True
00:00:05.8	I: 20 : True; Imin: -10000 : True; Imax: 20000 : True; IWindow: 10 : True
00:00:05.8	D: 1500 : True; Dmin: -10000 : True; Dmax: 10000 : True
00:00:05.8	Result min: -10000 : True; Result max: 32000 : True
00:00:05.8	------------------------------------------------------------------
00:00:05.9	pump: SetSettings(PumpSettings)
00:00:05.9	status: SetStatus(equilibrate separation-column, this finishes at about: 6.40 min., )
00:00:06.2	autosampler-none: MoveValveDrive(Valve Drive 2, 60 deg)
00:00:06.3	pump: Manualmode_Pump_constantPressure(A, 214)
00:00:06.3	pump: GetTargetPressure(A) --> 214
00:00:06.3	--- Injection delay: 279.321620907142s
00:00:36.4	pump: Manualmode_Pump_constantSpeed(A, 0)
00:00:36.4	pump: GetSetPistonSpeed(A) --> 0
00:00:36.6	autosampler-none: MoveValveDrive(Valve Drive 2, 180 deg)
00:00:36.6	--- MaxPressureLimitA: 600 bar ---
00:00:36.6	pump: GetCurrentPressure(A) --> 212.8103
00:00:36.6	pump: GetCurrentPressure() --> 212.8103
00:00:36.6	pump: GetSettings() --> PumpSettings
00:00:36.6	pump: GetSetManualValvePosition(A) --> 0
00:00:36.6	-------------------------------------------------------
00:00:36.6	--- Reduce pressure ---
00:00:36.6	-------------------------------------------------------
00:00:36.6	--- Pressure channel A: 212.810333251953
00:00:36.6	--- Pressure channel B: 212.810333251953
00:00:36.6	pump: Manualmode_Pump_constantSpeed(A, 0)
00:00:36.6	pump: GetSetPistonSpeed(A) --> 0
00:00:36.6	pump: Manualmode_Pump_constantSpeed(, 0)
00:00:36.6	pump: GetSetPistonSpeed() --> 0
00:00:36.6	pump: IsIdle() --> True
00:00:36.6	-------------------------------------------------------
00:00:36.7	pump: SetMaxPressureLimit(A, 620)
00:00:36.7	pump: GetMaxPressureLimit(A) --> 620
00:00:36.7	-------------------------------------------------------
00:00:36.7	--- Separation Column Equilibration:
00:00:36.7	-------------------------------------------------------
00:00:36.7	--- ovenTemp [C]:                                 50
00:00:36.7	--- Separator Unity-Flow @ ovenTemp [ul/min/bar]: 0.00058605984562038
00:00:36.7	--- Separator Volume [ul]:                        0.463875790256618
00:00:36.7	--- Separator Equilibration Volume Multiplier:    4
00:00:36.7	--- Separator Equilibration Pressure [bar]:       600
00:00:36.7	--- Separator Equilibration Flow [ul/min]:        0.343270946137334
00:00:36.7	--- Separator Equilibration Volume [ul]:          1.85550316102647
00:00:36.7	--- Separator Equilibration Time [min]:           5.40536034845236
00:00:36.7	--- max. Volume (10*V+2ul/min*t) [ul]:            29.3657523071694
00:00:36.7	--- Separator Equilibration Time Out [min]:       54.0536034845236
00:00:36.7	-------------------------------------------------------
00:00:36.7	pump: Manualmode_Pump_constantPressure(A, 600)
00:00:36.7	pump: GetPistonPosition(A) --> 845.306031466793
00:00:47.7	pump: GetPistonPosition(A) --> 874.941093847126
00:00:47.7	pump: GetPistonPosition(A) --> 874.941093847126
00:00:47.7	pump: GetPistonPosition(A) --> 874.941093847126
00:04:45.9	status: SetStatus(aspirate & inject, )
00:04:46.4	autosampler-left: LeaveObject()
00:04:50.6	autosampler-left: MoveToObject(LCMS Wash 1, 3)
00:04:51.3	autosampler-left: PenetrateObject(LCMS Wash 1, 3)
00:04:51.4	autosampler-left: EmptySyringe()
00:04:52.4	autosampler-left: LeaveObject()
00:04:53.0	Cleaning syringe and needle exterior
00:05:08.8	autosampler-left: CleanSyringe(LCMS Wash 1, 1, 30 mm, 40 uL/s, 500 ms, 30 mm, 40 uL/s, 80 %, 2)
00:05:08.9	autosampler-left: ChangeTool(LCP 1) --> False
00:05:12.3	autosampler-left: MoveToObject(Item Position 3, 1, True, True, True)
00:05:15.4	autosampler-left: PenetrateWithBottomSense(Item Position 3, 1, 1 mm)
00:05:16.4	autosampler-left: AspirateSyringe(2 uL, 5 uL/s, 500 ms)
00:05:17.4	autosampler-left: LeaveObject()
00:05:18.1	autosampler-left: AspirateSyringe(0.5 uL, 5 uL/s, 500 ms)
00:05:28.5	autosampler-left: MoveToObject(Rack 2, 15, True, True, True)
00:05:32.0	autosampler-left: PenetrateWithBottomSense(Rack 2, 15, 1 mm)
00:05:32.8	autosampler-left: AspirateSyringe(1 uL, 5 uL/s, 500 ms)
00:05:40.2	autosampler-left: LeaveObject()
00:05:41.0	autosampler-left: AspirateSyringe(1 uL, 5 uL/s, 500 ms)
00:05:44.7	autosampler-left: MoveToObject(LCMS Wash 1, 1, True, True, True)
00:05:45.6	autosampler-left: PenetrateObject(LCMS Wash 1, 1, 30 mm)
00:05:50.6	autosampler-left: Wait(5 s)
00:05:51.4	autosampler-left: LeaveObject()
00:05:54.5	autosampler-left: MoveToObject(LCInjector1)
00:05:55.3	autosampler-left: DispenseSyringe(0.75 uL, 1 uL/s)
00:05:57.7	autosampler-left: PenetrateWithConstForce(LCInjector1)
00:05:57.8	autosampler-left: MoveValveDrive(Valve Drive 1, 0 deg)
00:05:58.9	autosampler-left: Wait(1 s)
00:06:02.0	autosampler-left: DispenseSyringe(2.75 uL, 1 uL/s)
00:06:03.1	autosampler-left: Wait(1 s)
00:06:03.4	status: RemoveStatus(aspirate & inject)
00:06:12.4	pump: GetPistonPosition(A) --> 877.521807492295
00:06:12.4	pump: GetCurrentPressure(A) --> 599.9534
00:06:12.4	--- act. pressure [bar]:                 599.953369140625
00:06:12.4	--- used volume [uL]:                    2.58071364516877
00:06:12.4	--- average flow (incl. leaks) [uL/min]: 0.47692517212955
00:06:12.4	--- act. equilibration time [min]:       5.41114999999991
00:06:12.4	-------------------------------------------------------
00:06:12.4	status: RemoveStatus(equilibrate separation-column, this finishes at about: 6.40 min.)
00:06:14.5	autosampler-none: MoveValveDrive(Valve Drive 2, 180 deg)
00:06:14.5	pump: GetSetManualValvePosition(A) --> 0
00:06:14.5	pump: GetCurrentPressure(A) --> 600.0125
00:06:14.5	pump: SetManualValvePosition(A, 0, False)
00:06:14.7	status: SetStatus(load separation-column, this finishes at about: 17.96 min., )
00:06:14.9	autosampler-none: MoveValveDrive(Valve Drive 1, 60 deg)
00:06:16.1	-------------------------------------------------------
00:06:16.1	--- Sample Loading on Separation Column:
00:06:16.1	-------------------------------------------------------
00:06:16.1	--- ovenTemp [C]:                      50
00:06:16.1	--- Separator Unity-Flow [ul/bar]:     0.00058605984562038
00:06:16.1	--- Separator Volume [ul]:             0.463875790256618
00:06:16.1	--- Sample Volume [ul]:                1
00:06:16.1	--- Separator Load Pressure [bar]:     600
00:06:16.1	--- Separator Load Flow [ul/min]:      0.343270946137334
00:06:16.1	--- Separator Volume Multiplier:       2
00:06:16.1	--- Separator Load Volume (+2) [ul]:   4
00:06:16.1	--- Separator Load Time [min]:         11.6526028346125
00:06:16.1	--- max. Volume (10*V+2ul/min*t) [ul]: 63.3052056692249
00:06:16.1	--- Separator Load Time Out [min]:     116.526028346125
00:06:16.1	-------------------------------------------------------
00:06:16.1	pump: Manualmode_Pump_constantPressure(A, 600)
00:06:16.1	pump: GetPistonPosition(A) --> 877.917019848116
00:06:16.2	autosampler-left: EmptySyringe(5 uL/s)
00:06:19.4	pump: GetPistonPosition(A) --> 878.797084670142
00:06:19.4	pump: GetPistonPosition(A) --> 878.797084670142
00:06:19.4	pump: GetPistonPosition(A) --> 878.797084670142
00:07:14.6	autosampler-left: CleanInjector(LCInjector1, LCP 1, 200 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 2, False)
00:08:15.5	autosampler-left: CleanInjector(LCInjector1, LCP 1, 200 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 1, True)
00:08:30.8	autosampler-left: CleanSyringe(LCMS Wash 1, 2, 30 mm, 40 uL/s, 500 ms, 30 mm, 40 uL/s, 80 %, 2)
00:08:50.9	autosampler-left: CleanSyringe(LCMS Wash 1, 1, 30 mm, 40 uL/s, 500 ms, 30 mm, 40 uL/s, 80 %, 3)
00:08:54.1	autosampler-left: MoveToHome()
00:17:58.7	pump: GetPistonPosition(A) --> 883.63450903814
00:17:58.7	pump: GetCurrentPressure(A) --> 599.9731
00:17:58.7	-------------------------------------------------------
00:17:58.7	--- Finished: Sample Loading on Separation Column: (const_pressure_load_and_equilibration)
00:17:58.7	-------------------------------------------------------
00:17:58.7	--- act. pressure [bar]:                 599.973083496094
00:17:58.7	--- used volume [uL]:                    4.83742436799753
00:17:58.7	--- average flow (incl. leaks) [uL/min]: 0.415027686218225
00:17:58.7	--- act. loading time [min]:             11.6556666666666
00:17:58.7	-------------------------------------------------------
00:17:58.7	status: RemoveStatus(load separation-column, this finishes at about: 17.96 min.)
00:17:58.7	pump: GetSettings() --> PumpSettings
00:17:58.7	------------------------------------------------------------------
00:17:58.7	PID settings changed:
00:17:58.7	------------------------------------------------------------------
00:17:58.7	P: 100 : True; Pmin: -10000 : True; Pmax: 10000 : True
00:17:58.7	I: 100 : True; Imin: -1000 : True; Imax: 1000 : True; IWindow: 100 : True
00:17:58.7	D: 5000 : True; Dmin: -32000 : True; Dmax: 32000 : True
00:17:58.7	Result min: -5000 : True; Result max: 25000 : True
00:17:58.7	------------------------------------------------------------------
00:17:58.7	pump: SetSettings(PumpSettings)
00:17:58.7	pump: GetSettings() --> PumpSettings
00:17:58.7	------------------------------------------------------------------
00:17:58.7	PID settings changed:
00:17:58.7	------------------------------------------------------------------
00:17:58.7	P: 100 : False; Pmin: -10000 : False; Pmax: 10000 : False
00:17:58.7	I: 100 : False; Imin: -1000 : False; Imax: 1000 : False; IWindow: 2 : True
00:17:58.7	D: 5000 : False; Dmin: -32000 : False; Dmax: 32000 : False
00:17:58.7	Result min: -5000 : False; Result max: 25000 : False
00:17:58.7	------------------------------------------------------------------
00:17:58.7	pump: SetSettings(PumpSettings)
00:17:58.7	status: SetStatus(preparing gradient start, )
00:17:58.8	--- Starting conditioning paths ---
00:17:58.8	pump: GetSettings() --> PumpSettings
00:17:58.8	------------------------------------------------------------------
00:17:58.8	PID settings changed:
00:17:58.8	------------------------------------------------------------------
00:17:58.8	P: 100 : True; Pmin: -10000 : True; Pmax: 10000 : True
00:17:58.8	I: 100 : True; Imin: -1000 : True; Imax: 1000 : True; IWindow: 100 : True
00:17:58.8	D: 5000 : True; Dmin: -32000 : True; Dmax: 32000 : True
00:17:58.8	Result min: -5000 : True; Result max: 25000 : True
00:17:58.8	------------------------------------------------------------------
00:17:58.8	pump: SetSettings(PumpSettings)
00:17:58.8	pump: Manualmode_Pump_constantPressure(A, 0)
00:17:58.8	pump: GetTargetPressure(A) --> 0
00:17:58.8	pump: GetCurrentPressure(A) --> 599.9139
00:17:59.8	pump: GetCurrentPressure(A) --> 560.3162
00:18:00.8	pump: GetCurrentPressure(A) --> 505.0213
00:18:01.8	pump: GetCurrentPressure(A) --> 452.428
00:18:02.8	pump: GetCurrentPressure(A) --> 397.074
00:18:03.8	pump: GetCurrentPressure(A) --> 344.7963
00:18:04.8	pump: GetCurrentPressure(A) --> 293.0116
00:18:05.8	pump: GetCurrentPressure(A) --> 243.12
00:18:06.8	pump: GetCurrentPressure(A) --> 192.834
00:18:07.8	pump: GetCurrentPressure(A) --> 142.0944
00:18:08.8	pump: GetCurrentPressure(A) --> 97.62582
00:18:09.9	pump: GetCurrentPressure(A) --> 50.77111
00:18:10.9	pump: GetCurrentPressure(A) --> 24.97735
00:18:11.9	pump: GetCurrentPressure(A) --> 12.90871
00:18:12.1	autosampler-none: MoveValveDrive(Valve Drive 2, 0 deg)
00:18:12.1	pump: SetManualValvePosition(A, 240, False)
00:18:12.7	pump: SetManualValvePosition(B, 240, False)
00:18:14.7	--- Set constant binary flow ---
00:18:14.7	pump: Manualmode_Pump_constantFlow_binary(1, 1)
00:18:14.7	pump: GetSetFlow(A) --> 1
00:18:14.7	pump: GetSetFlow(B) --> 1
00:18:14.7	

00:18:14.7	--- Starting spline flow reduction B/A ---
00:18:14.7	pump: GetSetExternalTemperature() --> 50
00:18:14.7	--- Oven temperatur: 50
00:18:14.7	--- Separator: Name: Ionoptics 25cm, Func: Separator, ColDia: 0.075 mm, Len: 250 mm, PartDia: 1.6 µm, Porosity: 42 %
00:18:14.7	--- Spline fitting time: 97.6577595902957 s
00:18:14.7	--- Spline fitting time adapted: 10 s
00:18:14.7	--- y = 0x + 1
00:18:14.7	--- p0.Time -1, p0.Flow 1
00:18:14.7	--- p1.Time 0, p1.Flow 1
00:18:14.7	--- p2.Time 9, p2.Flow 1
00:18:14.7	--- p3.Time 10, p3.Flow 1, p3.Mix 0
00:18:14.7	--- p4.Time 40, p4.Flow 1, p4.Mix 0
00:18:14.7	--- Strategy function end
00:18:14.7	--- y = 0x + 0
00:18:14.7	--- p0.Time -1, p0.Flow 1
00:18:14.7	--- p1.Time 0, p1.Flow 1
00:18:14.7	--- p2.Time 9, p2.Flow 0
00:18:14.7	--- p3.Time 10, p3.Flow 0, p3.Mix 0
00:18:14.7	--- p4.Time 40, p4.Flow 0, p4.Mix 0
00:18:14.7	--- Strategy function end
00:18:14.7	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
00:18:14.7	XXXXX Time 0, Flow 2, Mix 50
00:18:14.7	XXXXX Time 1, Flow 1.94545, Mix 48.59813
00:18:14.7	XXXXX Time 2, Flow 1.84848, Mix 45.90163
00:18:14.7	XXXXX Time 3, Flow 1.72121, Mix 41.9014
00:18:14.7	XXXXX Time 4, Flow 1.57575, Mix 36.53846
00:18:14.7	XXXXX Time 5, Flow 1.42424, Mix 29.78723
00:18:14.8	XXXXX Time 6, Flow 1.27878, Mix 21.80094
00:18:14.8	XXXXX Time 7, Flow 1.15151, Mix 13.15789
00:18:14.8	XXXXX Time 8, Flow 1.05454, Mix 5.17241
00:18:14.8	XXXXX Time 9, Flow 1, Mix 0
00:18:14.8	--- Gradient is created, switching valves A and B
00:18:14.8	pump: GetSetManualValvePosition(A) --> 240
00:18:14.8	pump: GetCurrentPressure(A) --> 5.237628
00:18:14.8	pump: SetManualValvePosition(A, 240, False)
00:18:15.0	pump: GetSetManualValvePosition(B) --> 240
00:18:15.0	pump: GetCurrentPressure(B) --> 0.9702224
00:18:15.0	pump: SetManualValvePosition(B, 240, False)
00:18:15.2	--- Valves A and B switched to MixTee, starting gradient
00:18:15.2	--- LoadGradient() ---
00:18:15.2	--- Loading gradient method index: 0
00:18:15.2	pump: LoadMethod(0, ZrData.ZrPumpMethod)
00:18:15.7	pump: GetMethodState(0) --> loaded
00:18:15.7	--- Set gradient start
00:18:15.7	--- StartGradient() ---
00:18:15.7	--- Starting gradient method index: 0
00:18:15.7	pump: SetMethodSignal(0, StartTrunk)
00:18:15.9	pump: GetMethodState(0) --> runningTrunk
00:18:15.9	--- Start GradientSplineFit
00:18:15.9	pump: GetMethodState(0) --> runningTrunk
00:18:16.9	pump: GetCurrentPressure(A) --> 93.20854
00:18:16.9	pump: GetCurrentPressure(B) --> 56.58062
00:18:16.9	--- GradientSplineFit is running
00:18:24.9	--- GradientSplineFit has finished
00:18:24.9	--- End GradientSplineFit
00:18:24.9	--- Finished spline flow reduction B ---
00:18:25.9	pump: GetSetExternalTemperature() --> 50
00:18:25.9	--- Oven temperatur: 50
00:18:25.9	--- Separator: Name: Ionoptics 25cm, Func: Separator, ColDia: 0.075 mm, Len: 250 mm, PartDia: 1.6 µm, Porosity: 42 %
00:18:25.9	--- Spline fitting time: 97.6577595902957 s
00:18:25.9	--- Spline fitting time adapted: 60 s
00:18:25.9	--- y = 0x + 0.01
00:18:25.9	--- p0.Time -1, p0.Flow 1
00:18:25.9	--- p1.Time 0, p1.Flow 1
00:18:25.9	--- p2.Time 59, p2.Flow 0.01
00:18:25.9	--- p3.Time 60, p3.Flow 0.01, p3.Mix 0
00:18:25.9	--- p4.Time 90, p4.Flow 0.01, p4.Mix 0
00:18:25.9	--- Strategy function end
00:18:25.9	--- y = 0x + 0
00:18:25.9	--- p0.Time -1, p0.Flow 0
00:18:25.9	--- p1.Time 0, p1.Flow 0
00:18:25.9	--- p2.Time 59, p2.Flow 0
00:18:25.9	--- p3.Time 60, p3.Flow 0, p3.Mix 0
00:18:25.9	--- p4.Time 90, p4.Flow 0, p4.Mix 0
00:18:25.9	--- Strategy function end
00:18:25.9	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
00:18:25.9	XXXXX Time 0, Flow 1, Mix 0
00:18:25.9	XXXXX Time 1, Flow 0.99837, Mix 0
00:18:25.9	XXXXX Time 2, Flow 0.99518, Mix 0
00:18:25.9	XXXXX Time 3, Flow 0.99048, Mix 0
00:18:25.9	XXXXX Time 4, Flow 0.98432, Mix 0
00:18:25.9	XXXXX Time 5, Flow 0.97675, Mix 0
00:18:25.9	XXXXX Time 6, Flow 0.96784, Mix 0
00:18:25.9	XXXXX Time 7, Flow 0.95763, Mix 0
00:18:25.9	XXXXX Time 8, Flow 0.94619, Mix 0
00:18:25.9	XXXXX Time 9, Flow 0.93356, Mix 0
00:18:25.9	XXXXX Time 10, Flow 0.91981, Mix 0
00:18:25.9	XXXXX Time 11, Flow 0.90498, Mix 0
00:18:25.9	XXXXX Time 12, Flow 0.88914, Mix 0
00:18:25.9	XXXXX Time 13, Flow 0.87233, Mix 0
00:18:25.9	XXXXX Time 14, Flow 0.85462, Mix 0
00:18:25.9	XXXXX Time 15, Flow 0.83605, Mix 0
00:18:26.0	XXXXX Time 16, Flow 0.81668, Mix 0
00:18:26.0	XXXXX Time 17, Flow 0.79658, Mix 0
00:18:26.0	XXXXX Time 18, Flow 0.77578, Mix 0
00:18:26.0	XXXXX Time 19, Flow 0.75435, Mix 0
00:18:26.0	XXXXX Time 20, Flow 0.73235, Mix 0
00:18:26.0	XXXXX Time 21, Flow 0.70982, Mix 0
00:18:26.0	XXXXX Time 22, Flow 0.68682, Mix 0
00:18:26.0	XXXXX Time 23, Flow 0.66341, Mix 0
00:18:26.0	XXXXX Time 24, Flow 0.63964, Mix 0
00:18:26.0	XXXXX Time 25, Flow 0.61558, Mix 0
00:18:26.0	XXXXX Time 26, Flow 0.59126, Mix 0
00:18:26.0	XXXXX Time 27, Flow 0.56675, Mix 0
00:18:26.0	XXXXX Time 28, Flow 0.5421, Mix 0
00:18:26.0	XXXXX Time 29, Flow 0.51737, Mix 0
00:18:26.0	XXXXX Time 30, Flow 0.49262, Mix 0
00:18:26.0	XXXXX Time 31, Flow 0.46789, Mix 0
00:18:26.0	XXXXX Time 32, Flow 0.44324, Mix 0
00:18:26.0	XXXXX Time 33, Flow 0.41873, Mix 0
00:18:26.0	XXXXX Time 34, Flow 0.39441, Mix 0
00:18:26.0	XXXXX Time 35, Flow 0.37035, Mix 0
00:18:26.0	XXXXX Time 36, Flow 0.34658, Mix 0
00:18:26.0	XXXXX Time 37, Flow 0.32317, Mix 0
00:18:26.0	XXXXX Time 38, Flow 0.30017, Mix 0
00:18:26.0	XXXXX Time 39, Flow 0.27764, Mix 0
00:18:26.0	XXXXX Time 40, Flow 0.25564, Mix 0
00:18:26.0	XXXXX Time 41, Flow 0.23421, Mix 0
00:18:26.0	XXXXX Time 42, Flow 0.21341, Mix 0
00:18:26.0	XXXXX Time 43, Flow 0.19331, Mix 0
00:18:26.0	XXXXX Time 44, Flow 0.17394, Mix 0
00:18:26.0	XXXXX Time 45, Flow 0.15537, Mix 0
00:18:26.0	XXXXX Time 46, Flow 0.13766, Mix 0
00:18:26.0	XXXXX Time 47, Flow 0.12085, Mix 0
00:18:26.0	XXXXX Time 48, Flow 0.10501, Mix 0
00:18:26.0	XXXXX Time 49, Flow 0.09018, Mix 0
00:18:26.0	XXXXX Time 50, Flow 0.07643, Mix 0
00:18:26.0	XXXXX Time 51, Flow 0.0638, Mix 0
00:18:26.0	XXXXX Time 52, Flow 0.05236, Mix 0
00:18:26.0	XXXXX Time 53, Flow 0.04215, Mix 0
00:18:26.0	XXXXX Time 54, Flow 0.03324, Mix 0
00:18:26.0	XXXXX Time 55, Flow 0.02567, Mix 0
00:18:26.0	XXXXX Time 56, Flow 0.01951, Mix 0
00:18:26.0	XXXXX Time 57, Flow 0.01481, Mix 0
00:18:26.0	XXXXX Time 58, Flow 0.01162, Mix 0
00:18:26.0	XXXXX Time 59, Flow 0.00999, Mix 0
00:18:26.0	--- Gradient is created, switching valves A and B
00:18:26.0	pump: GetSetManualValvePosition(A) --> 240
00:18:26.0	pump: GetCurrentPressure(A) --> 99.81474
00:18:26.0	pump: SetManualValvePosition(A, 240, False)
00:18:26.2	pump: GetSetManualValvePosition(B) --> 240
00:18:26.2	pump: GetCurrentPressure(B) --> 13.3741
00:18:26.2	pump: SetManualValvePosition(B, 240, False)
00:18:26.4	--- Valves A and B switched to MixTee, starting gradient
00:18:26.4	--- LoadGradient() ---
00:18:26.4	--- Loading gradient method index: 0
00:18:26.4	pump: LoadMethod(0, ZrData.ZrPumpMethod)
00:18:26.9	pump: GetMethodState(0) --> loaded
00:18:26.9	--- Set gradient start
00:18:26.9	--- StartGradient() ---
00:18:26.9	--- Starting gradient method index: 0
00:18:26.9	pump: SetMethodSignal(0, StartTrunk)
00:18:27.1	pump: GetMethodState(0) --> runningTrunk
00:18:27.1	--- Start GradientSplineFit
00:18:27.1	pump: GetMethodState(0) --> runningTrunk
00:18:28.1	pump: GetCurrentPressure(A) --> 100.6627
00:18:28.1	pump: GetCurrentPressure(B) --> 14.4587
00:18:28.1	--- GradientSplineFit is running
00:19:26.2	--- GradientSplineFit has finished
00:19:26.2	--- End GradientSplineFit
00:19:26.2	--- Finished spline flow reduction A ---

00:19:26.2	--- Finished conditioning paths ---
00:19:31.7	autosampler-none: MoveValveDrive(Valve Drive 2, 120 deg)
00:19:31.7	pump: GetSetExternalTemperature() --> 50
00:19:31.7	--- Oven temperatur: 50
00:19:31.7	--- Separator: Name: Ionoptics 25cm, Func: Separator, ColDia: 0.075 mm, Len: 250 mm, PartDia: 1.6 µm, Porosity: 42 %
00:19:31.7	--- Spline fitting time: 97.6577595902957 s
00:19:31.7	--- Spline fitting time adapted: 53.1258212171209 s
00:19:31.7	--- Press: 546.305678956798; colPress: 516.305678956798, visco: 0.00571568967517482, flow > 0.3
00:19:31.7	--- Flow: 0.3; Mix: 0.02, calcI: 217.586024730242
00:19:31.7	--- Ki calc: 217.586024730242
00:19:31.7	pump: GetSettings() --> PumpSettings
00:19:31.7	------------------------------------------------------------------
00:19:31.7	PID settings changed:
00:19:31.7	------------------------------------------------------------------
00:19:31.7	P: 200 : True; Pmin: -32000 : True; Pmax: 32000 : True
00:19:31.7	I: 600 : True; Imin: -32000 : True; Imax: 32000 : True; IWindow: 100 : True
00:19:31.7	D: 1000 : True; Dmin: -32000 : True; Dmax: 32000 : True
00:19:31.7	Result min: -32000 : True; Result max: 32000 : True
00:19:31.7	------------------------------------------------------------------
00:19:31.7	pump: SetSettings(PumpSettings)
00:19:31.7	pump: GetSettings() --> PumpSettings
00:19:31.7	------------------------------------------------------------------
00:19:31.7	PID settings changed:
00:19:31.7	------------------------------------------------------------------
00:19:31.7	P: 200 : False; Pmin: -32000 : False; Pmax: 32000 : False
00:19:31.7	I: 217 : True; Imin: -32000 : False; Imax: 32000 : False; IWindow: 100 : False
00:19:31.7	D: 1000 : False; Dmin: -32000 : False; Dmax: 32000 : False
00:19:31.7	Result min: -32000 : False; Result max: 32000 : False
00:19:31.7	------------------------------------------------------------------
00:19:31.7	pump: SetSettings(PumpSettings)
00:19:31.7	--- y = -2.5E-05x + 0.295328145530428
00:19:31.7	--- p0.Time -1, p0.Flow 0.01
00:19:31.7	--- p1.Time 0, p1.Flow 0.01
00:19:31.7	--- p2.Time 52.1258212171209, p2.Flow 0.294025
00:19:31.7	--- p3.Time 53.1258212171209, p3.Flow 0.294, p3.Mix 2
00:19:31.7	--- p4.Time 2453.12582121712, p4.Flow 0.234, p4.Mix 22
00:19:31.7	--- Strategy function end
00:19:31.7	--- y = 2.5E-05x + 0.00467185446957198
00:19:31.7	--- p0.Time -1, p0.Flow 0
00:19:31.7	--- p1.Time 0, p1.Flow 0
00:19:31.7	--- p2.Time 52.1258212171209, p2.Flow 0.005975
00:19:31.7	--- p3.Time 53.1258212171209, p3.Flow 0.006, p3.Mix 2
00:19:31.7	--- p4.Time 2453.12582121712, p4.Flow 0.066, p4.Mix 22
00:19:31.7	--- Strategy function end
00:19:31.7	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
00:19:31.7	XXXXX Time 0, Flow 0.01, Mix 0
00:19:31.7	XXXXX Time 1, Flow 0.0106, Mix 0.10917
00:19:31.7	XXXXX Time 2, Flow 0.01179, Mix 0.29095
00:19:31.7	XXXXX Time 3, Flow 0.01353, Mix 0.50056
00:19:31.7	XXXXX Time 4, Flow 0.01581, Mix 0.70499
00:19:31.7	XXXXX Time 5, Flow 0.01861, Mix 0.88733
00:19:31.7	XXXXX Time 6, Flow 0.02189, Mix 1.04239
00:19:31.7	XXXXX Time 7, Flow 0.02564, Mix 1.17119
00:19:31.7	XXXXX Time 8, Flow 0.02983, Mix 1.27715
00:19:31.7	XXXXX Time 9, Flow 0.03444, Mix 1.3642
00:19:31.7	XXXXX Time 10, Flow 0.03945, Mix 1.43596
00:19:31.7	XXXXX Time 11, Flow 0.04482, Mix 1.49547
00:19:31.7	XXXXX Time 12, Flow 0.05055, Mix 1.54518
00:19:31.7	XXXXX Time 13, Flow 0.05661, Mix 1.58706
00:19:31.7	XXXXX Time 14, Flow 0.06297, Mix 1.62262
00:19:31.7	XXXXX Time 15, Flow 0.06961, Mix 1.65308
00:19:31.7	XXXXX Time 16, Flow 0.0765, Mix 1.67938
00:19:31.7	XXXXX Time 17, Flow 0.08363, Mix 1.70227
00:19:31.7	XXXXX Time 18, Flow 0.09097, Mix 1.72234
00:19:31.7	XXXXX Time 19, Flow 0.0985, Mix 1.74007
00:19:31.8	XXXXX Time 20, Flow 0.10619, Mix 1.75586
00:19:31.8	XXXXX Time 21, Flow 0.11402, Mix 1.77001
00:19:31.8	XXXXX Time 22, Flow 0.12197, Mix 1.78277
00:19:31.8	XXXXX Time 23, Flow 0.13001, Mix 1.79437
00:19:31.8	XXXXX Time 24, Flow 0.13813, Mix 1.80497
00:19:31.8	XXXXX Time 25, Flow 0.14629, Mix 1.81472
00:19:31.8	XXXXX Time 26, Flow 0.15448, Mix 1.82375
00:19:31.8	XXXXX Time 27, Flow 0.16267, Mix 1.83216
00:19:31.8	XXXXX Time 28, Flow 0.17084, Mix 1.84004
00:19:31.8	XXXXX Time 29, Flow 0.17896, Mix 1.84747
00:19:31.8	XXXXX Time 30, Flow 0.18701, Mix 1.85451
00:19:31.8	XXXXX Time 31, Flow 0.19497, Mix 1.86122
00:19:31.8	XXXXX Time 32, Flow 0.20282, Mix 1.86766
00:19:31.8	XXXXX Time 33, Flow 0.21053, Mix 1.87386
00:19:31.8	XXXXX Time 34, Flow 0.21808, Mix 1.87988
00:19:31.8	XXXXX Time 35, Flow 0.22545, Mix 1.88574
00:19:31.8	XXXXX Time 36, Flow 0.2326, Mix 1.89148
00:19:31.8	XXXXX Time 37, Flow 0.23953, Mix 1.89713
00:19:31.8	XXXXX Time 38, Flow 0.2462, Mix 1.90273
00:19:31.8	XXXXX Time 39, Flow 0.2526, Mix 1.9083
00:19:31.8	XXXXX Time 40, Flow 0.25869, Mix 1.91386
00:19:31.8	XXXXX Time 41, Flow 0.26446, Mix 1.91945
00:19:31.8	XXXXX Time 42, Flow 0.26989, Mix 1.92509
00:19:31.8	XXXXX Time 43, Flow 0.27494, Mix 1.93081
00:19:31.8	XXXXX Time 44, Flow 0.2796, Mix 1.93663
00:19:31.8	XXXXX Time 45, Flow 0.28385, Mix 1.94258
00:19:31.8	XXXXX Time 46, Flow 0.28765, Mix 1.94869
00:19:31.8	XXXXX Time 47, Flow 0.291, Mix 1.95499
00:19:31.8	XXXXX Time 48, Flow 0.29385, Mix 1.96152
00:19:31.8	XXXXX Time 49, Flow 0.2962, Mix 1.9683
00:19:31.8	XXXXX Time 50, Flow 0.29801, Mix 1.97539
00:19:31.8	XXXXX Time 51, Flow 0.29927, Mix 1.98282
00:19:31.8	XXXXX Time 52, Flow 0.29995, Mix 1.99065
00:19:31.8	XXXXX Time 53, Flow 0.30003, Mix 1.99892
00:19:31.8	--- Gradient is created, switching valves A and B
00:19:31.8	pump: GetSetManualValvePosition(A) --> 240
00:19:31.8	pump: GetCurrentPressure(A) --> 1.076707
00:19:31.8	pump: SetManualValvePosition(A, 240, False)
00:19:32.0	pump: GetSetManualValvePosition(B) --> 240
00:19:32.0	pump: GetCurrentPressure(B) --> 0
00:19:32.0	pump: SetManualValvePosition(B, 240, False)
00:19:32.2	--- Valves A and B switched to MixTee, starting gradient
00:19:32.2	--- LoadGradient() ---
00:19:32.2	--- Loading gradient method index: 0
00:19:32.2	pump: LoadMethod(0, ZrData.ZrPumpMethod)
00:19:32.7	pump: GetMethodState(0) --> loaded
00:19:32.7	--- Set gradient start
00:19:32.7	--- StartGradient() ---
00:19:32.7	--- Starting gradient method index: 0
00:19:32.7	pump: SetMethodSignal(0, StartTrunk)
00:19:32.9	pump: GetMethodState(0) --> runningTrunk
00:19:32.9	--- Start GradientSplineFit
00:19:32.9	pump: GetMethodState(0) --> runningTrunk
00:19:33.9	pump: GetCurrentPressure(A) --> 2.082428
00:19:33.9	pump: GetCurrentPressure(B) --> 1.443502
00:19:33.9	--- GradientSplineFit is running
00:20:25.9	--- GradientSplineFit has finished
00:20:25.9	--- End GradientSplineFit
00:20:25.9	status: RemoveStatus(preparing gradient start)
00:20:25.9	Setting signal "lc-ready"
00:20:25.9	Waiting for signal "ms-start"...
00:20:25.9	--- LoadGradient() ---
00:20:25.9	--- Loading gradient method index: 0
00:20:25.9	pump: LoadMethod(0, ZrData.ZrPumpMethod)
00:20:26.4	pump: GetMethodState(0) --> loaded
00:20:26.4	--- Set gradient start
00:20:26.4	--- StartGradient() ---
00:20:26.4	--- Starting gradient method index: 0
00:20:26.4	pump: SetMethodSignal(0, StartTrunk)
00:20:26.6	pump: GetMethodState(0) --> runningTrunk
00:20:28.0	autosampler-none: SetSignal(Output Signal 1)
00:20:28.0	status: SetStatus(wash, )
00:20:30.5	status: SetStatus(elution, )
00:20:32.3	autosampler-left: MoveToObject(LCInjector1)
00:20:35.0	autosampler-left: PenetrateWithConstForce(LCInjector1)
00:20:35.2	autosampler-left: MoveValveDrive(Valve Drive 1, 0 deg)
00:21:04.5	autosampler-left: CleanInjector(LCInjector1, LCP 1, 100 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 2, False)
00:22:35.0	autosampler-left: CleanInjector(LCInjector1, LCP 1, 300 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 1, True)
00:22:35.2	autosampler-left: MoveValveDrive(Valve Drive 1, 60 deg)
00:22:38.0	autosampler-left: MoveToHome()
01:20:27.3	Setting signal "lc-done"
01:20:27.3	status: RemoveStatus(elution)
01:20:27.3	status: RemoveStatus(wash)
01:20:27.3	pump: GetCurrentPressure(A) --> 345.2498
01:20:27.3	pump: GetCurrentPressure(B) --> 348.9888
01:20:27.3	pump: GetSettings() --> PumpSettings
01:20:27.3	pump: GetSetManualValvePosition(A) --> 240
01:20:27.3	pump: GetSetManualValvePosition(B) --> 240
01:20:27.3	-------------------------------------------------------
01:20:27.3	--- Reduce pressure ---
01:20:27.3	-------------------------------------------------------
01:20:27.3	--- Pressure channel A: 345.249847412109
01:20:27.3	--- Pressure channel B: 348.98876953125
01:20:27.3	pump: GetSettings() --> PumpSettings
01:20:27.3	------------------------------------------------------------------
01:20:27.3	PID settings changed:
01:20:27.3	------------------------------------------------------------------
01:20:27.3	P: 250 : True; Pmin: -5500 : True; Pmax: 32000 : True
01:20:27.3	I: 50 : True; Imin: -20000 : True; Imax: 20000 : True; IWindow: 50 : True
01:20:27.3	D: 1500 : True; Dmin: -10000 : True; Dmax: 10000 : True
01:20:27.3	Result min: -32000 : True; Result max: 32000 : True
01:20:27.3	------------------------------------------------------------------
01:20:27.3	pump: SetSettings(PumpSettings)
01:20:27.6	--- Set pressure channel A:          10
01:20:27.6	--- Set pressure channel B:          5
01:20:27.6	--- Reduce pressure flow controlled: True
01:21:09.6	--------------------------------------------------------
01:21:09.6	--- Log PID parameter called from: reducePressure
01:21:09.6	--------------------------------------------------------
01:21:09.6	--- P: 200; Pmin: -32000; Pmax: 32000
01:21:09.6	--- I: 217; Imin: -32000; Imax: 32000; IWindow: 100
01:21:09.6	--- D: 1000; Dmin: -32000; Dmax: 32000
01:21:09.6	--- Result min: -32000; Result max: 32000
01:21:09.6	--------------------------------------------------------
01:21:09.6	--------------------------------------------------------
01:21:09.6	--- Log instrument settings called from: reducePressure
01:21:09.6	--------------------------------------------------------
01:21:09.6	--- HomeSpeed: 2000; PurgeSpeed: 2000
01:21:09.6	--- PressureTrackingExcessFactor: 96
01:21:09.6	--- FlowResistanceA: 300; FlowResistanceB: 100; FlowResistanceOut: 150
01:21:09.6	--- FC_FlowFilterDepth: 5; FC_PressureFilterDepth: 0
01:21:09.6	--- PC_OutputFilterDepth: 0
01:21:09.6	--- CompressibilityFactorB: 2.29999995231628; PressurePIDNegativeResultDivisor: 1
01:21:09.6	--- ExternalZeroPressureOffsetA: 124.007247924805; ExternalZeroPressureOffsetB: 130.798812866211
01:21:09.6	--- ExternalPressureScalingFactorA: 0.0197199992835522; ExternalPressureScalingFactorB: 0.0197199992835522
01:21:09.6	--------------------------------------------------------
01:21:09.6	--- Final pressure channel A: 5.31650733947754
01:21:09.6	--- Final pressure channel B: 4.914222240448
01:21:09.6	-------------------------------------------------------
01:21:09.6	-------------------------------------------------------
01:21:09.6	--- Extended Wash:
01:21:09.6	-------------------------------------------------------
01:21:09.6	status: SetStatus(clean injector, )
01:21:10.2	autosampler-left: MoveValveDrive(Valve Drive 2, 0 deg)
01:21:10.2	pump: GetPistonPosition(A) --> 851.708387855299
01:21:10.2	pump: GetPistonPosition(B) --> 442.519714636412
01:21:10.2	-------------------------------------------------------
01:21:10.2	--- Optional Refill of Pump Heads:
01:21:10.2	--- initiated by channel A:     False, B: False
01:21:10.2	pump: GetPistonPosition(A) --> 851.708387855299
01:21:10.2	pump: GetPistonPosition(B) --> 442.519714636412
01:21:10.2	--- Piston position channel A:  851.708387855299, B: 442.519714636412
01:21:10.2	-------------------------------------------------------
01:21:10.2	pump: SetDigitalOutput(PO2, False)
01:21:10.2	pump: SetManualValvePosition(A, 0, False)
01:21:11.0	pump: Manualmode_Pump_constantPressure(A, 400)
01:21:11.0	pump: GetTargetPressure(A) --> 400
01:21:11.0	--- Clean injector with organic
01:21:11.3	autosampler-left: MoveValveDrive(Valve Drive 2, 300 deg)
01:21:11.5	autosampler-left: MoveValveDrive(Valve Drive 1, 0 deg)
01:21:47.5	autosampler-left: CleanInjector(LCInjector1, LCP 1, 100 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 2, False)
01:21:47.6	autosampler-left: MoveValveDrive(Valve Drive 1, 60 deg)
01:21:48.6	--- Prime with organic volume: 10
01:21:48.6	pump: GetPistonPosition(A) --> 901.458439678036
01:22:06.3	pump: GetPistonPosition(A) --> 911.468810509435
01:22:06.3	--- Clean injector with aqueous
01:22:06.5	autosampler-left: MoveValveDrive(Valve Drive 1, 0 deg)
01:23:05.2	autosampler-left: CleanInjector(LCInjector1, LCP 1, 200 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 1, False)
01:23:05.4	autosampler-left: MoveValveDrive(Valve Drive 1, 60 deg)
01:23:06.4	--- Prime with aqueous volume: 40
01:23:06.4	pump: GetPistonPosition(A) --> 939.286775698932
01:24:33.4	pump: GetPistonPosition(A) --> 979.312760500768
01:24:33.4	status: RemoveStatus(clean injector)
01:24:35.8	autosampler-left: LeaveObject()
01:24:35.9	pump: Manualmode_Pump_constantSpeed(A, 0)
01:24:35.9	pump: GetSetPistonSpeed(A) --> 0
01:24:35.9	pump: Manualmode_Pump_constantSpeed(B, 0)
01:24:35.9	pump: GetSetPistonSpeed(B) --> 0
01:24:35.9	pump: IsIdle() --> False
01:24:36.0	autosampler-left: MoveValveDrive(Valve Drive 1, 60 deg)
01:24:39.4	autosampler-left: MoveToHome()
01:24:39.6	pump: IsIdle() --> True
01:24:39.6	COMPLETED
