Path: 2024-06-06_09-51-15_One-column-separation
Procedure: One column separation
Argument list:
uses_trap = False
uses_separator = True
is_isocratic = False
analysis_time = 1800
oven_temperature = 50
sample_volume = 1
sample_position = Slot2:17
presample_solvent_volume = 2
presample_air_volume = 0.5
postsample_air_volume = 1
postsample_solvent_volume = 2
sample_aspirate_speed = 5
sample_postaspirate_delay = 500
sample_inject_speed = 1
calibrant_volume = 0.6
calibrantTime = 5.65115098697118
is_calibrant_inject = False
is_extended_wash = True
is_bottom_sense = True
injection_method = uLPickup
trap = Name: Thermo Trap Cartridge 5mm, Func: Separator, ColDia: 0.3 mm, Len: 5 mm, PartDia: 5 µm, Porosity: 42 %
separator = Name: Ionoptics 25cm, Func: Separator, ColDia: 0.075 mm, Len: 250 mm, PartDia: 1.6 µm, Porosity: 42 %
separator_volume = 0.463875790256618
separator_unityflow = 0.00058605984562038
separator_equilibration_volumemultiplier = 4
separator_equilibration_pressure = 600
column_load_volumemultiplier = 2
column_load_pressure = 600
separator_equil_time = 4.05402026133927
column_load_time = 8.73945212595934
gradient = (0 sec,0.3 µL/min,2.00 %), (2400 sec,0.3 µL/min,22.00 %), (3000 sec,0.3 µL/min,37.00 %), (3300 sec,0.3 µL/min,80.00 %), (3600 sec,0.3 µL/min,80.00 %)
00:00:00.0	STARTED
00:00:00.4	pump: GetSettings() --> PumpSettings
00:00:00.4	--------------------------------------------------------
00:00:00.4	--- Log instrument settings called from: settings
00:00:00.4	--------------------------------------------------------
00:00:00.4	--- HomeSpeed: 2000; PurgeSpeed: 2000
00:00:00.4	--- PressureTrackingExcessFactor: 96
00:00:00.4	--- FlowResistanceA: 300; FlowResistanceB: 100; FlowResistanceOut: 150
00:00:00.4	--- FC_FlowFilterDepth: 5; FC_PressureFilterDepth: 0
00:00:00.4	--- PC_OutputFilterDepth: 0
00:00:00.4	--- CompressibilityFactorB: 2.29999995231628; PressurePIDNegativeResultDivisor: 1
00:00:00.4	--- ExternalZeroPressureOffsetA: 124.007247924805; ExternalZeroPressureOffsetB: 130.798812866211
00:00:00.4	--- ExternalPressureScalingFactorA: 0.0197199992835522; ExternalPressureScalingFactorB: 0.0197199992835522
00:00:00.4	--------------------------------------------------------
00:00:00.4	Lua version:		1.1.0
00:00:00.4	Lua date:			2020/01/30
00:00:00.5	--- Experiment:    Description
00:00:00.5	-------------------------------------------------------
00:00:00.5	--- Trap Column:              Thermo Trap Cartridge 5mm
00:00:00.5	---    Manufacturer:          Thermo Scientific
00:00:00.5	---    Part Number:           
00:00:00.5	---    Serial Number:         
00:00:00.5	---    Type/Material:         µ-Precolum TM Cartridge  / PepMap TM C18
00:00:00.5	---    Length:                5 mm
00:00:00.5	---    Inner Diameter:        0.3 mm
00:00:00.5	---    Particle Diameter:     5 um
00:00:00.5	---    Is Particle Pore Size: True
00:00:00.5	---    Particle Pore Size:    100
00:00:00.5	---    Is Column Porosity:    False
00:00:00.5	---    Column Porosity:       0.42 (0.0-1.0)
00:00:00.5	---    Is Max Temperature:    False
00:00:00.5	---    max Temperature:       65 C
00:00:00.5	---    Is Max Pressure:       False
00:00:00.5	---    max Pressure:          1000 bar
00:00:00.5	---    Is Max Flow:           False
00:00:00.5	---    max Flow:              9 uL/min
00:00:00.5	---    Advanced Settings:     False
00:00:00.5	---    Column Comments:       Manufacturer no: 160454
00:00:00.5	-------------------------------------------------------
00:00:00.5	--- Separation Column:        Ionoptics 25cm
00:00:00.5	---    Manufacturer:          Ionoptics Aurora 25cm
00:00:00.5	---    Part Number:           
00:00:00.5	---    Serial Number:         
00:00:00.5	---    Type/Material:         C18
00:00:00.5	---    Length:                250 mm
00:00:00.5	---    Inner Diameter:        0.075 mm
00:00:00.5	---    Particle Diameter:     1.6 um
00:00:00.5	---    Is Particle Pore Size: False
00:00:00.5	---    Particle Pore Size:    100
00:00:00.5	---    Is Column Porosity:    False
00:00:00.5	---    Column Porosity:       0.42 (0.0-1.0)
00:00:00.5	---    Is Max Temperature:    False
00:00:00.5	---    max Temperature:       65 C
00:00:00.5	---    Is Max Pressure:       False
00:00:00.5	---    max Pressure:          1000 bar
00:00:00.5	---    Is Max Flow:           False
00:00:00.5	---    max Flow:              9 uL/min
00:00:00.5	---    Advanced Settings:     False
00:00:00.5	---    Column Comments:           
00:00:00.5	-------------------------------------------------------
00:00:00.5	'Valve Drive 1' is 'ILcInjectorValve'
00:00:00.5	'Valve Drive 2' is 'ISelectorValve'
00:00:00.5	--- Seperator equil time:  4.05
00:00:00.5	--- Column loading time:   8.73
00:00:00.5	--- Sep.Length:                250
00:00:00.5	--- Sep.ColumnDiameter:        0.075
00:00:00.5	--- Sep.IsColumnPorosity:      False
00:00:00.5	--- Sep.ParticleDiameter:      1.6
00:00:00.5	--- oven_temperature:          50
00:00:00.5	--- Column viscoMix:           0.00566684100509561
00:00:00.5	--- Column flow @ 1020 bar:    0.58605984562038
00:00:00.5	--- Column unity flow:         0.00058605984562038
00:00:00.5	pump: GetSettings() --> PumpSettings
00:00:00.5	--------------------------------------------------------
00:00:00.5	--- Log instrument settings called from: Two Column Separation
00:00:00.5	--------------------------------------------------------
00:00:00.5	--- HomeSpeed: 2000; PurgeSpeed: 2000
00:00:00.5	--- PressureTrackingExcessFactor: 96
00:00:00.5	--- FlowResistanceA: 300; FlowResistanceB: 100; FlowResistanceOut: 150
00:00:00.5	--- FC_FlowFilterDepth: 5; FC_PressureFilterDepth: 0
00:00:00.5	--- PC_OutputFilterDepth: 0
00:00:00.5	--- CompressibilityFactorB: 2.29999995231628; PressurePIDNegativeResultDivisor: 1
00:00:00.5	--- ExternalZeroPressureOffsetA: 124.007247924805; ExternalZeroPressureOffsetB: 130.798812866211
00:00:00.5	--- ExternalPressureScalingFactorA: 0.0197199992835522; ExternalPressureScalingFactorB: 0.0197199992835522
00:00:00.5	--------------------------------------------------------
00:00:00.5	--- Oven temperature: 50
00:00:00.5	--- Separator: Name: Ionoptics 25cm, Func: Separator, ColDia: 0.075 mm, Len: 250 mm, PartDia: 1.6 µm, Porosity: 42 % ---
00:00:00.5	--- Trap:  ---
00:00:00.5	--- MaxPressureLimitAB: 1000 bar ---
00:00:00.5	pump: GetCurrentPressure(A) --> 332.3727
00:00:00.5	pump: GetCurrentPressure(B) --> 10.55414
00:00:00.5	pump: GetSettings() --> PumpSettings
00:00:00.5	pump: GetSetManualValvePosition(A) --> 0
00:00:00.5	-------------------------------------------------------
00:00:00.5	--- Reduce pressure ---
00:00:00.5	-------------------------------------------------------
00:00:00.5	--- Pressure channel A: 332.372680664063
00:00:00.5	--- Pressure channel B: 10.554141998291
00:00:00.5	pump: Manualmode_Pump_constantSpeed(A, 0)
00:00:00.5	pump: GetSetPistonSpeed(A) --> 0
00:00:00.5	pump: Manualmode_Pump_constantSpeed(B, 0)
00:00:00.5	pump: GetSetPistonSpeed(B) --> 0
00:00:00.5	pump: IsIdle() --> True
00:00:00.5	-------------------------------------------------------
00:00:00.6	pump: SetMaxPressureLimit(A, 1020)
00:00:00.6	pump: GetMaxPressureLimit(A) --> 1020
00:00:00.7	pump: SetMaxPressureLimit(B, 1020)
00:00:00.7	pump: GetMaxPressureLimit(B) --> 1020
00:00:00.7	pump: GetSettings() --> PumpSettings
00:00:00.7	------------------------------------------------------------------
00:00:00.7	PID settings changed:
00:00:00.7	------------------------------------------------------------------
00:00:00.7	P: 175 : True; Pmin: -5000 : True; Pmax: 5000 : True
00:00:00.7	I: 5 : True; Imin: -200 : True; Imax: 1000 : True; IWindow: 10 : True
00:00:00.7	D: 0 : True; Dmin: -1000 : True; Dmax: 1000 : True
00:00:00.7	Result min: -6000 : True; Result max: 8000 : True
00:00:00.7	------------------------------------------------------------------
00:00:00.7	pump: SetSettings(PumpSettings)
00:00:00.7	pump: GetPumpSideState(A) --> manualMode
00:00:00.7	pump: GetPumpSideState(B) --> manualMode
00:00:00.7	pump: GetPistonPosition(A) --> 1113.30922699874
00:00:00.7	pump: GetPistonPosition(B) --> 504.108963093958
00:00:00.7	-------------------------------------------------------
00:00:00.7	--- Optional Refill of Pump Heads:
00:00:00.7	--- initiated by channel A:     True, B: False
00:00:00.7	pump: GetPistonPosition(A) --> 1113.30922699874
00:00:00.7	pump: GetPistonPosition(B) --> 504.108963093958
00:00:00.7	--- Piston position channel A:  1113.30922699874, B: 504.108963093958
00:00:00.7	-------------------------------------------------------
00:00:00.7	status: SetStatus(Refilling pumps, )
00:00:00.7	pump: GetSettings() --> PumpSettings
00:00:00.7	pump: GetSettings() --> PumpSettings
00:00:00.7	------------------------------------------------------------------
00:00:00.7	PID settings changed:
00:00:00.7	------------------------------------------------------------------
00:00:00.7	P: 800 : True; Pmin: -32000 : True; Pmax: 32000 : True
00:00:00.7	I: 100 : True; Imin: -100 : True; Imax: 300 : True; IWindow: 50 : True
00:00:00.7	D: 1000 : True; Dmin: -10000 : True; Dmax: 10000 : True
00:00:00.7	Result min: -32000 : True; Result max: 32000 : True
00:00:00.7	------------------------------------------------------------------
00:00:00.7	pump: SetSettings(PumpSettings)
00:00:00.7	pump: GetDigitalOutputs() --> 0
00:00:00.7	pump: SetDigitalOutput(PO2, True)
00:00:00.7	pump: GetCurrentPressure(A) --> 330.4993
00:00:00.7	pump: GetCurrentPressure(B) --> 10.6133
00:00:00.7	pump: GetSettings() --> PumpSettings
00:00:00.7	pump: GetSetManualValvePosition(A) --> 0
00:00:00.7	-------------------------------------------------------
00:00:00.7	--- Reduce pressure ---
00:00:00.7	-------------------------------------------------------
00:00:00.7	--- Pressure channel A: 330.499298095703
00:00:00.7	--- Pressure channel B: 10.613302230835
00:00:00.7	pump: GetSettings() --> PumpSettings
00:00:00.7	------------------------------------------------------------------
00:00:00.7	PID settings changed:
00:00:00.7	------------------------------------------------------------------
00:00:00.7	P: 250 : True; Pmin: -32000 : True; Pmax: 32000 : True
00:00:00.7	I: 20 : True; Imin: -20000 : True; Imax: 20000 : True; IWindow: 100 : True
00:00:00.7	D: 1500 : True; Dmin: -10000 : True; Dmax: 10000 : True
00:00:00.7	Result min: -32000 : True; Result max: 32000 : True
00:00:00.7	------------------------------------------------------------------
00:00:00.8	pump: SetSettings(PumpSettings)
00:00:00.9	--- Set pressure channel A:          50
00:00:00.9	--- Set pressure channel B:          25
00:00:00.9	--- Reduce pressure flow controlled: False
00:00:04.7	--------------------------------------------------------
00:00:04.7	--- Log PID parameter called from: reducePressure
00:00:04.7	--------------------------------------------------------
00:00:04.7	--- P: 800; Pmin: -32000; Pmax: 32000
00:00:04.7	--- I: 100; Imin: -100; Imax: 300; IWindow: 50
00:00:04.7	--- D: 1000; Dmin: -10000; Dmax: 10000
00:00:04.7	--- Result min: -32000; Result max: 32000
00:00:04.7	--------------------------------------------------------
00:00:04.7	--------------------------------------------------------
00:00:04.7	--- Log instrument settings called from: reducePressure
00:00:04.7	--------------------------------------------------------
00:00:04.7	--- HomeSpeed: 2000; PurgeSpeed: 2000
00:00:04.7	--- PressureTrackingExcessFactor: 96
00:00:04.7	--- FlowResistanceA: 300; FlowResistanceB: 100; FlowResistanceOut: 150
00:00:04.7	--- FC_FlowFilterDepth: 5; FC_PressureFilterDepth: 0
00:00:04.7	--- PC_OutputFilterDepth: 0
00:00:04.7	--- CompressibilityFactorB: 2.29999995231628; PressurePIDNegativeResultDivisor: 1
00:00:04.7	--- ExternalZeroPressureOffsetA: 124.007247924805; ExternalZeroPressureOffsetB: 130.798812866211
00:00:04.7	--- ExternalPressureScalingFactorA: 0.0197199992835522; ExternalPressureScalingFactorB: 0.0197199992835522
00:00:04.7	--------------------------------------------------------
00:00:04.7	--- Final pressure channel A: 48.5427474975586
00:00:04.7	--- Final pressure channel B: 10.554141998291
00:00:04.7	-------------------------------------------------------
00:00:30.9	Purge A
00:00:31.5	Purge B
00:00:39.5	Refill A
00:00:57.6	Refill B
00:02:10.9	build_pressure A
00:02:29.0	build_pressure B
00:02:54.5	Degas A: Iteration=1, build pressure vol=7.2, hold pressure vol=0.0 (30 seconds)
00:03:15.2	Degas B: Iteration=1, build pressure vol=16.1, hold pressure vol=0.4 (30 seconds)
00:03:15.4	Compression Volume A [7.19864540643565µL]:
00:03:15.4	Compression Volume B [16.088724297564µL]:
00:03:15.4	pump: SetSettings(PumpSettings)
00:03:15.4	--------------------------------------------------------
00:03:15.4	--- Log PID parameter called from: Degas
00:03:15.4	--------------------------------------------------------
00:03:15.4	--- P: 175; Pmin: -5000; Pmax: 5000
00:03:15.4	--- I: 5; Imin: -200; Imax: 1000; IWindow: 10
00:03:15.4	--- D: 0; Dmin: -1000; Dmax: 1000
00:03:15.4	--- Result min: -6000; Result max: 8000
00:03:15.4	--------------------------------------------------------
00:03:15.4	--------------------------------------------------------
00:03:15.4	--- Log instrument settings called from: Degas
00:03:15.4	--------------------------------------------------------
00:03:15.4	--- HomeSpeed: 2000; PurgeSpeed: 2000
00:03:15.4	--- PressureTrackingExcessFactor: 96
00:03:15.4	--- FlowResistanceA: 300; FlowResistanceB: 100; FlowResistanceOut: 150
00:03:15.4	--- FC_FlowFilterDepth: 5; FC_PressureFilterDepth: 0
00:03:15.4	--- PC_OutputFilterDepth: 0
00:03:15.4	--- CompressibilityFactorB: 2.29999995231628; PressurePIDNegativeResultDivisor: 1
00:03:15.4	--- ExternalZeroPressureOffsetA: 124.007247924805; ExternalZeroPressureOffsetB: 130.798812866211
00:03:15.4	--- ExternalPressureScalingFactorA: 0.0197199992835522; ExternalPressureScalingFactorB: 0.0197199992835522
00:03:15.4	--------------------------------------------------------
00:03:15.4	status: RemoveStatus(Refilling pumps)
00:03:15.4	pump: SetDigitalOutput(PO2, False)
00:03:15.4	pump: GetCurrentPressure(A) --> 49.86399
00:03:15.4	pump: GetCurrentPressure(B) --> 50.09274
00:03:15.4	pump: GetSettings() --> PumpSettings
00:03:15.4	pump: GetSetManualValvePosition(A) --> 300
00:03:15.4	-------------------------------------------------------
00:03:15.4	--- Reduce pressure ---
00:03:15.4	-------------------------------------------------------
00:03:15.4	--- Pressure channel A: 49.8639869689941
00:03:15.4	--- Pressure channel B: 50.0927391052246
00:03:15.4	pump: GetSettings() --> PumpSettings
00:03:15.4	------------------------------------------------------------------
00:03:15.4	PID settings changed:
00:03:15.4	------------------------------------------------------------------
00:03:15.4	P: 250 : True; Pmin: -32000 : True; Pmax: 32000 : True
00:03:15.4	I: 20 : True; Imin: -20000 : True; Imax: 20000 : True; IWindow: 100 : True
00:03:15.4	D: 1500 : True; Dmin: -10000 : True; Dmax: 10000 : True
00:03:15.4	Result min: -32000 : True; Result max: 32000 : True
00:03:15.4	------------------------------------------------------------------
00:03:15.4	pump: SetSettings(PumpSettings)
00:03:15.7	--- Set pressure channel A:          10
00:03:15.7	--- Set pressure channel B:          5
00:03:15.7	--- Reduce pressure flow controlled: False
00:03:18.4	--------------------------------------------------------
00:03:18.4	--- Log PID parameter called from: reducePressure
00:03:18.4	--------------------------------------------------------
00:03:18.4	--- P: 175; Pmin: -5000; Pmax: 5000
00:03:18.4	--- I: 5; Imin: -200; Imax: 1000; IWindow: 10
00:03:18.4	--- D: 0; Dmin: -1000; Dmax: 1000
00:03:18.4	--- Result min: -6000; Result max: 8000
00:03:18.4	--------------------------------------------------------
00:03:18.4	--------------------------------------------------------
00:03:18.4	--- Log instrument settings called from: reducePressure
00:03:18.4	--------------------------------------------------------
00:03:18.4	--- HomeSpeed: 2000; PurgeSpeed: 2000
00:03:18.4	--- PressureTrackingExcessFactor: 96
00:03:18.4	--- FlowResistanceA: 300; FlowResistanceB: 100; FlowResistanceOut: 150
00:03:18.4	--- FC_FlowFilterDepth: 5; FC_PressureFilterDepth: 0
00:03:18.4	--- PC_OutputFilterDepth: 0
00:03:18.4	--- CompressibilityFactorB: 2.29999995231628; PressurePIDNegativeResultDivisor: 1
00:03:18.4	--- ExternalZeroPressureOffsetA: 124.007247924805; ExternalZeroPressureOffsetB: 130.798812866211
00:03:18.4	--- ExternalPressureScalingFactorA: 0.0197199992835522; ExternalPressureScalingFactorB: 0.0197199992835522
00:03:18.4	--------------------------------------------------------
00:03:18.4	--- Final pressure channel A: 7.6237473487854
00:03:18.4	--- Final pressure channel B: 2.50838232040405
00:03:18.4	-------------------------------------------------------
00:03:18.4	pump: GetSetManualValvePosition(A) --> 300
00:03:18.4	pump: GetCurrentPressure(A) --> 7.623747
00:03:18.4	pump: SetManualValvePosition(A, 0, True)
00:03:19.0	pump: GetSetManualValvePosition(B) --> 300
00:03:19.0	pump: GetCurrentPressure(B) --> 2.784462
00:03:19.0	pump: SetManualValvePosition(B, 180, False)
00:03:19.6	pump: GetSettings() --> PumpSettings
00:03:19.6	------------------------------------------------------------------
00:03:19.6	PID settings changed:
00:03:19.6	------------------------------------------------------------------
00:03:19.6	P: 250 : True; Pmin: -10000 : True; Pmax: 10000 : True
00:03:19.6	I: 20 : True; Imin: -10000 : True; Imax: 20000 : True; IWindow: 10 : True
00:03:19.6	D: 1500 : True; Dmin: -10000 : True; Dmax: 10000 : True
00:03:19.6	Result min: -10000 : True; Result max: 32000 : True
00:03:19.6	------------------------------------------------------------------
00:03:19.6	pump: SetSettings(PumpSettings)
00:03:19.6	status: SetStatus(equilibrate separation-column, this finishes at about: 9.64 min., )
00:03:20.0	autosampler-none: MoveValveDrive(Valve Drive 2, 60 deg)
00:03:20.1	pump: Manualmode_Pump_constantPressure(A, 214)
00:03:20.1	pump: GetTargetPressure(A) --> 214
00:03:20.1	--- Injection delay: 279.321620907142s
00:03:50.2	pump: Manualmode_Pump_constantSpeed(A, 0)
00:03:50.2	pump: GetSetPistonSpeed(A) --> 0
00:03:50.4	autosampler-none: MoveValveDrive(Valve Drive 2, 180 deg)
00:03:50.4	--- MaxPressureLimitA: 600 bar ---
00:03:50.4	pump: GetCurrentPressure(A) --> 212.7512
00:03:50.4	pump: GetCurrentPressure() --> 212.7512
00:03:50.4	pump: GetSettings() --> PumpSettings
00:03:50.4	pump: GetSetManualValvePosition(A) --> 0
00:03:50.4	-------------------------------------------------------
00:03:50.4	--- Reduce pressure ---
00:03:50.4	-------------------------------------------------------
00:03:50.4	--- Pressure channel A: 212.751174926758
00:03:50.4	--- Pressure channel B: 212.751174926758
00:03:50.4	pump: Manualmode_Pump_constantSpeed(A, 0)
00:03:50.4	pump: GetSetPistonSpeed(A) --> 0
00:03:50.4	pump: Manualmode_Pump_constantSpeed(, 0)
00:03:50.4	pump: GetSetPistonSpeed() --> 0
00:03:50.4	pump: IsIdle() --> True
00:03:50.4	-------------------------------------------------------
00:03:50.5	pump: SetMaxPressureLimit(A, 620)
00:03:50.5	pump: GetMaxPressureLimit(A) --> 620
00:03:50.5	-------------------------------------------------------
00:03:50.5	--- Separation Column Equilibration:
00:03:50.5	-------------------------------------------------------
00:03:50.5	--- ovenTemp [C]:                                 50
00:03:50.5	--- Separator Unity-Flow @ ovenTemp [ul/min/bar]: 0.00058605984562038
00:03:50.5	--- Separator Volume [ul]:                        0.463875790256618
00:03:50.5	--- Separator Equilibration Volume Multiplier:    4
00:03:50.5	--- Separator Equilibration Pressure [bar]:       600
00:03:50.5	--- Separator Equilibration Flow [ul/min]:        0.343270946137334
00:03:50.5	--- Separator Equilibration Volume [ul]:          1.85550316102647
00:03:50.5	--- Separator Equilibration Time [min]:           5.40536034845236
00:03:50.5	--- max. Volume (10*V+2ul/min*t) [ul]:            29.3657523071694
00:03:50.5	--- Separator Equilibration Time Out [min]:       54.0536034845236
00:03:50.5	-------------------------------------------------------
00:03:50.5	pump: Manualmode_Pump_constantPressure(A, 600)
00:03:50.5	pump: GetPistonPosition(A) --> 32.758433796532
00:04:05.5	pump: GetPistonPosition(A) --> 75.1399847700299
00:04:05.5	pump: GetPistonPosition(A) --> 75.1399847700299
00:04:05.5	pump: GetPistonPosition(A) --> 75.1399847700299
00:07:59.7	status: SetStatus(aspirate & inject, )
00:08:00.2	autosampler-left: LeaveObject()
00:08:04.2	autosampler-left: MoveToObject(LCMS Wash 1, 3)
00:08:04.9	autosampler-left: PenetrateObject(LCMS Wash 1, 3)
00:08:05.1	autosampler-left: EmptySyringe()
00:08:05.7	autosampler-left: LeaveObject()
00:08:06.1	Cleaning syringe and needle exterior
00:08:21.9	autosampler-left: CleanSyringe(LCMS Wash 1, 1, 30 mm, 40 uL/s, 500 ms, 30 mm, 40 uL/s, 80 %, 2)
00:08:22.0	autosampler-left: ChangeTool(LCP 1) --> False
00:08:25.4	autosampler-left: MoveToObject(Item Position 3, 1, True, True, True)
00:08:28.6	autosampler-left: PenetrateWithBottomSense(Item Position 3, 1, 1 mm)
00:08:29.6	autosampler-left: AspirateSyringe(2 uL, 5 uL/s, 500 ms)
00:08:30.8	autosampler-left: LeaveObject()
00:08:31.5	autosampler-left: AspirateSyringe(0.5 uL, 5 uL/s, 500 ms)
00:08:41.8	autosampler-left: MoveToObject(Rack 2, 17, True, True, True)
00:08:45.6	autosampler-left: PenetrateWithBottomSense(Rack 2, 17, 1 mm)
00:08:46.5	autosampler-left: AspirateSyringe(1 uL, 5 uL/s, 500 ms)
00:08:54.1	autosampler-left: LeaveObject()
00:08:54.9	autosampler-left: AspirateSyringe(1 uL, 5 uL/s, 500 ms)
00:08:58.4	autosampler-left: MoveToObject(LCMS Wash 1, 1, True, True, True)
00:08:59.3	autosampler-left: PenetrateObject(LCMS Wash 1, 1, 30 mm)
00:09:04.4	autosampler-left: Wait(5 s)
00:09:05.5	autosampler-left: LeaveObject()
00:09:08.4	autosampler-left: MoveToObject(LCInjector1)
00:09:09.3	autosampler-left: DispenseSyringe(0.75 uL, 1 uL/s)
00:09:11.9	autosampler-left: PenetrateWithConstForce(LCInjector1)
00:09:12.0	autosampler-left: MoveValveDrive(Valve Drive 1, 0 deg)
00:09:13.0	autosampler-left: Wait(1 s)
00:09:16.0	autosampler-left: DispenseSyringe(2.75 uL, 1 uL/s)
00:09:17.0	autosampler-left: Wait(1 s)
00:09:17.5	status: RemoveStatus(aspirate & inject)
00:09:30.5	pump: GetPistonPosition(A) --> 77.8970464828204
00:09:30.5	pump: GetCurrentPressure(A) --> 600.0519
00:09:30.5	--- act. pressure [bar]:                 600.051940917969
00:09:30.5	--- used volume [uL]:                    2.75706171279042
00:09:30.5	--- average flow (incl. leaks) [uL/min]: 0.509038297850671
00:09:30.5	--- act. equilibration time [min]:       5.41621666666664
00:09:30.5	-------------------------------------------------------
00:09:30.5	status: RemoveStatus(equilibrate separation-column, this finishes at about: 9.64 min.)
00:09:32.9	autosampler-none: MoveValveDrive(Valve Drive 2, 180 deg)
00:09:32.9	pump: GetSetManualValvePosition(A) --> 0
00:09:32.9	pump: GetCurrentPressure(A) --> 600.0519
00:09:32.9	pump: SetManualValvePosition(A, 0, False)
00:09:33.1	status: SetStatus(load separation-column, this finishes at about: 21.28 min., )
00:09:33.3	autosampler-none: MoveValveDrive(Valve Drive 1, 60 deg)
00:09:34.5	-------------------------------------------------------
00:09:34.5	--- Sample Loading on Separation Column:
00:09:34.5	-------------------------------------------------------
00:09:34.5	--- ovenTemp [C]:                      50
00:09:34.5	--- Separator Unity-Flow [ul/bar]:     0.00058605984562038
00:09:34.5	--- Separator Volume [ul]:             0.463875790256618
00:09:34.5	--- Sample Volume [ul]:                1
00:09:34.5	--- Separator Load Pressure [bar]:     600
00:09:34.5	--- Separator Load Flow [ul/min]:      0.343270946137334
00:09:34.5	--- Separator Volume Multiplier:       2
00:09:34.5	--- Separator Load Volume (+2) [ul]:   4
00:09:34.5	--- Separator Load Time [min]:         11.6526028346125
00:09:34.5	--- max. Volume (10*V+2ul/min*t) [ul]: 63.3052056692249
00:09:34.5	--- Separator Load Time Out [min]:     116.526028346125
00:09:34.5	-------------------------------------------------------
00:09:34.5	pump: Manualmode_Pump_constantPressure(A, 600)
00:09:34.5	pump: GetPistonPosition(A) --> 78.1850258093994
00:09:34.6	autosampler-left: EmptySyringe(5 uL/s)
00:09:38.8	pump: GetPistonPosition(A) --> 79.232223360596
00:09:38.8	pump: GetPistonPosition(A) --> 79.232223360596
00:09:38.8	pump: GetPistonPosition(A) --> 79.232223360596
00:10:33.3	autosampler-left: CleanInjector(LCInjector1, LCP 1, 200 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 2, False)
00:11:34.1	autosampler-left: CleanInjector(LCInjector1, LCP 1, 200 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 1, True)
00:11:50.1	autosampler-left: CleanSyringe(LCMS Wash 1, 2, 30 mm, 40 uL/s, 500 ms, 30 mm, 40 uL/s, 80 %, 2)
00:12:10.6	autosampler-left: CleanSyringe(LCMS Wash 1, 1, 30 mm, 40 uL/s, 500 ms, 30 mm, 40 uL/s, 80 %, 3)
00:12:13.7	autosampler-left: MoveToHome()
00:21:18.1	pump: GetPistonPosition(A) --> 84.2874648192425
00:21:18.1	pump: GetCurrentPressure(A) --> 599.9337
00:21:18.1	-------------------------------------------------------
00:21:18.1	--- Finished: Sample Loading on Separation Column: (const_pressure_load_and_equilibration)
00:21:18.1	-------------------------------------------------------
00:21:18.1	--- act. pressure [bar]:                 599.933654785156
00:21:18.1	--- used volume [uL]:                    5.05524145864646
00:21:18.1	--- average flow (incl. leaks) [uL/min]: 0.433717202891865
00:21:18.1	--- act. loading time [min]:             11.6556166666667
00:21:18.1	-------------------------------------------------------
00:21:18.1	status: RemoveStatus(load separation-column, this finishes at about: 21.28 min.)
00:21:18.1	pump: GetSettings() --> PumpSettings
00:21:18.1	------------------------------------------------------------------
00:21:18.1	PID settings changed:
00:21:18.1	------------------------------------------------------------------
00:21:18.1	P: 100 : True; Pmin: -10000 : True; Pmax: 10000 : True
00:21:18.1	I: 100 : True; Imin: -1000 : True; Imax: 1000 : True; IWindow: 100 : True
00:21:18.1	D: 5000 : True; Dmin: -32000 : True; Dmax: 32000 : True
00:21:18.1	Result min: -5000 : True; Result max: 25000 : True
00:21:18.1	------------------------------------------------------------------
00:21:18.1	pump: SetSettings(PumpSettings)
00:21:18.1	pump: GetSettings() --> PumpSettings
00:21:18.1	------------------------------------------------------------------
00:21:18.1	PID settings changed:
00:21:18.1	------------------------------------------------------------------
00:21:18.1	P: 100 : False; Pmin: -10000 : False; Pmax: 10000 : False
00:21:18.1	I: 100 : False; Imin: -1000 : False; Imax: 1000 : False; IWindow: 2 : True
00:21:18.1	D: 5000 : False; Dmin: -32000 : False; Dmax: 32000 : False
00:21:18.1	Result min: -5000 : False; Result max: 25000 : False
00:21:18.1	------------------------------------------------------------------
00:21:18.1	pump: SetSettings(PumpSettings)
00:21:18.1	status: SetStatus(preparing gradient start, )
00:21:18.2	--- Starting conditioning paths ---
00:21:18.2	pump: GetSettings() --> PumpSettings
00:21:18.2	------------------------------------------------------------------
00:21:18.2	PID settings changed:
00:21:18.2	------------------------------------------------------------------
00:21:18.2	P: 100 : True; Pmin: -10000 : True; Pmax: 10000 : True
00:21:18.2	I: 100 : True; Imin: -1000 : True; Imax: 1000 : True; IWindow: 100 : True
00:21:18.2	D: 5000 : True; Dmin: -32000 : True; Dmax: 32000 : True
00:21:18.2	Result min: -5000 : True; Result max: 25000 : True
00:21:18.2	------------------------------------------------------------------
00:21:18.2	pump: SetSettings(PumpSettings)
00:21:18.2	pump: Manualmode_Pump_constantPressure(A, 0)
00:21:18.2	pump: GetTargetPressure(A) --> 0
00:21:18.2	pump: GetCurrentPressure(A) --> 599.9731
00:21:19.2	pump: GetCurrentPressure(A) --> 572.7003
00:21:20.2	pump: GetCurrentPressure(A) --> 534.9957
00:21:21.2	pump: GetCurrentPressure(A) --> 497.3896
00:21:22.2	pump: GetCurrentPressure(A) --> 458.4032
00:21:23.2	pump: GetCurrentPressure(A) --> 420.6789
00:21:24.2	pump: GetCurrentPressure(A) --> 382.7376
00:21:25.2	pump: GetCurrentPressure(A) --> 347.0838
00:21:26.3	pump: GetCurrentPressure(A) --> 310.8779
00:21:27.3	pump: GetCurrentPressure(A) --> 278.2216
00:21:28.3	pump: GetCurrentPressure(A) --> 242.4495
00:21:29.3	pump: GetCurrentPressure(A) --> 207.3085
00:21:30.3	pump: GetCurrentPressure(A) --> 171.7139
00:21:31.3	pump: GetCurrentPressure(A) --> 137.2039
00:21:32.3	pump: GetCurrentPressure(A) --> 103.9165
00:21:33.3	pump: GetCurrentPressure(A) --> 70.17558
00:21:34.3	pump: GetCurrentPressure(A) --> 42.39011
00:21:35.3	pump: GetCurrentPressure(A) --> 25.62811
00:21:36.3	pump: GetCurrentPressure(A) --> 16.43859
00:21:37.3	pump: GetCurrentPressure(A) --> 10.87755
00:21:37.9	autosampler-none: MoveValveDrive(Valve Drive 2, 0 deg)
00:21:37.9	pump: SetManualValvePosition(A, 240, False)
00:21:38.5	pump: SetManualValvePosition(B, 240, False)
00:21:40.5	--- Set constant binary flow ---
00:21:40.5	pump: Manualmode_Pump_constantFlow_binary(1, 1)
00:21:40.5	pump: GetSetFlow(A) --> 1
00:21:40.5	pump: GetSetFlow(B) --> 1
00:21:40.5	

00:21:40.5	--- Starting spline flow reduction B/A ---
00:21:40.5	pump: GetSetExternalTemperature() --> 50
00:21:40.5	--- Oven temperatur: 50
00:21:40.5	--- Separator: Name: Ionoptics 25cm, Func: Separator, ColDia: 0.075 mm, Len: 250 mm, PartDia: 1.6 µm, Porosity: 42 %
00:21:40.5	--- Spline fitting time: 97.6577595902957 s
00:21:40.5	--- Spline fitting time adapted: 10 s
00:21:40.5	--- y = 0x + 1
00:21:40.5	--- p0.Time -1, p0.Flow 1
00:21:40.5	--- p1.Time 0, p1.Flow 1
00:21:40.5	--- p2.Time 9, p2.Flow 1
00:21:40.5	--- p3.Time 10, p3.Flow 1, p3.Mix 0
00:21:40.5	--- p4.Time 40, p4.Flow 1, p4.Mix 0
00:21:40.5	--- Strategy function end
00:21:40.5	--- y = 0x + 0
00:21:40.5	--- p0.Time -1, p0.Flow 1
00:21:40.5	--- p1.Time 0, p1.Flow 1
00:21:40.5	--- p2.Time 9, p2.Flow 0
00:21:40.5	--- p3.Time 10, p3.Flow 0, p3.Mix 0
00:21:40.5	--- p4.Time 40, p4.Flow 0, p4.Mix 0
00:21:40.5	--- Strategy function end
00:21:40.5	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
00:21:40.5	XXXXX Time 0, Flow 2, Mix 50
00:21:40.5	XXXXX Time 1, Flow 1.94545, Mix 48.59813
00:21:40.5	XXXXX Time 2, Flow 1.84848, Mix 45.90163
00:21:40.5	XXXXX Time 3, Flow 1.72121, Mix 41.9014
00:21:40.5	XXXXX Time 4, Flow 1.57575, Mix 36.53846
00:21:40.5	XXXXX Time 5, Flow 1.42424, Mix 29.78723
00:21:40.5	XXXXX Time 6, Flow 1.27878, Mix 21.80094
00:21:40.5	XXXXX Time 7, Flow 1.15151, Mix 13.15789
00:21:40.5	XXXXX Time 8, Flow 1.05454, Mix 5.17241
00:21:40.5	XXXXX Time 9, Flow 1, Mix 0
00:21:40.5	--- Gradient is created, switching valves A and B
00:21:40.5	pump: GetSetManualValvePosition(A) --> 240
00:21:40.5	pump: GetCurrentPressure(A) --> 3.344507
00:21:40.5	pump: SetManualValvePosition(A, 240, False)
00:21:40.7	pump: GetSetManualValvePosition(B) --> 240
00:21:40.7	pump: GetCurrentPressure(B) --> 0.2997424
00:21:40.7	pump: SetManualValvePosition(B, 240, False)
00:21:40.9	--- Valves A and B switched to MixTee, starting gradient
00:21:40.9	--- LoadGradient() ---
00:21:40.9	--- Loading gradient method index: 0
00:21:40.9	pump: LoadMethod(0, ZrData.ZrPumpMethod)
00:21:41.4	pump: GetMethodState(0) --> loaded
00:21:41.4	--- Set gradient start
00:21:41.4	--- StartGradient() ---
00:21:41.4	--- Starting gradient method index: 0
00:21:41.4	pump: SetMethodSignal(0, StartTrunk)
00:21:41.6	pump: GetMethodState(0) --> runningTrunk
00:21:41.6	--- Start GradientSplineFit
00:21:41.6	pump: GetMethodState(0) --> runningTrunk
00:21:42.6	pump: GetCurrentPressure(A) --> 66.78374
00:21:42.6	pump: GetCurrentPressure(B) --> 60.22882
00:21:42.6	--- GradientSplineFit is running
00:21:50.7	--- GradientSplineFit has finished
00:21:50.7	--- End GradientSplineFit
00:21:50.7	--- Finished spline flow reduction B ---
00:21:51.7	pump: GetSetExternalTemperature() --> 50
00:21:51.7	--- Oven temperatur: 50
00:21:51.7	--- Separator: Name: Ionoptics 25cm, Func: Separator, ColDia: 0.075 mm, Len: 250 mm, PartDia: 1.6 µm, Porosity: 42 %
00:21:51.7	--- Spline fitting time: 97.6577595902957 s
00:21:51.7	--- Spline fitting time adapted: 60 s
00:21:51.7	--- y = 0x + 0.01
00:21:51.7	--- p0.Time -1, p0.Flow 1
00:21:51.7	--- p1.Time 0, p1.Flow 1
00:21:51.7	--- p2.Time 59, p2.Flow 0.01
00:21:51.7	--- p3.Time 60, p3.Flow 0.01, p3.Mix 0
00:21:51.7	--- p4.Time 90, p4.Flow 0.01, p4.Mix 0
00:21:51.7	--- Strategy function end
00:21:51.7	--- y = 0x + 0
00:21:51.7	--- p0.Time -1, p0.Flow 0
00:21:51.7	--- p1.Time 0, p1.Flow 0
00:21:51.7	--- p2.Time 59, p2.Flow 0
00:21:51.7	--- p3.Time 60, p3.Flow 0, p3.Mix 0
00:21:51.7	--- p4.Time 90, p4.Flow 0, p4.Mix 0
00:21:51.7	--- Strategy function end
00:21:51.7	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
00:21:51.7	XXXXX Time 0, Flow 1, Mix 0
00:21:51.7	XXXXX Time 1, Flow 0.99837, Mix 0
00:21:51.7	XXXXX Time 2, Flow 0.99518, Mix 0
00:21:51.7	XXXXX Time 3, Flow 0.99048, Mix 0
00:21:51.7	XXXXX Time 4, Flow 0.98432, Mix 0
00:21:51.7	XXXXX Time 5, Flow 0.97675, Mix 0
00:21:51.7	XXXXX Time 6, Flow 0.96784, Mix 0
00:21:51.7	XXXXX Time 7, Flow 0.95763, Mix 0
00:21:51.7	XXXXX Time 8, Flow 0.94619, Mix 0
00:21:51.7	XXXXX Time 9, Flow 0.93356, Mix 0
00:21:51.7	XXXXX Time 10, Flow 0.91981, Mix 0
00:21:51.7	XXXXX Time 11, Flow 0.90498, Mix 0
00:21:51.7	XXXXX Time 12, Flow 0.88914, Mix 0
00:21:51.7	XXXXX Time 13, Flow 0.87233, Mix 0
00:21:51.7	XXXXX Time 14, Flow 0.85462, Mix 0
00:21:51.7	XXXXX Time 15, Flow 0.83605, Mix 0
00:21:51.7	XXXXX Time 16, Flow 0.81668, Mix 0
00:21:51.7	XXXXX Time 17, Flow 0.79658, Mix 0
00:21:51.7	XXXXX Time 18, Flow 0.77578, Mix 0
00:21:51.7	XXXXX Time 19, Flow 0.75435, Mix 0
00:21:51.7	XXXXX Time 20, Flow 0.73235, Mix 0
00:21:51.7	XXXXX Time 21, Flow 0.70982, Mix 0
00:21:51.7	XXXXX Time 22, Flow 0.68682, Mix 0
00:21:51.7	XXXXX Time 23, Flow 0.66341, Mix 0
00:21:51.7	XXXXX Time 24, Flow 0.63964, Mix 0
00:21:51.7	XXXXX Time 25, Flow 0.61558, Mix 0
00:21:51.7	XXXXX Time 26, Flow 0.59126, Mix 0
00:21:51.8	XXXXX Time 27, Flow 0.56675, Mix 0
00:21:51.8	XXXXX Time 28, Flow 0.5421, Mix 0
00:21:51.8	XXXXX Time 29, Flow 0.51737, Mix 0
00:21:51.8	XXXXX Time 30, Flow 0.49262, Mix 0
00:21:51.8	XXXXX Time 31, Flow 0.46789, Mix 0
00:21:51.8	XXXXX Time 32, Flow 0.44324, Mix 0
00:21:51.8	XXXXX Time 33, Flow 0.41873, Mix 0
00:21:51.8	XXXXX Time 34, Flow 0.39441, Mix 0
00:21:51.8	XXXXX Time 35, Flow 0.37035, Mix 0
00:21:51.8	XXXXX Time 36, Flow 0.34658, Mix 0
00:21:51.8	XXXXX Time 37, Flow 0.32317, Mix 0
00:21:51.8	XXXXX Time 38, Flow 0.30017, Mix 0
00:21:51.8	XXXXX Time 39, Flow 0.27764, Mix 0
00:21:51.8	XXXXX Time 40, Flow 0.25564, Mix 0
00:21:51.8	XXXXX Time 41, Flow 0.23421, Mix 0
00:21:51.8	XXXXX Time 42, Flow 0.21341, Mix 0
00:21:51.8	XXXXX Time 43, Flow 0.19331, Mix 0
00:21:51.8	XXXXX Time 44, Flow 0.17394, Mix 0
00:21:51.8	XXXXX Time 45, Flow 0.15537, Mix 0
00:21:51.8	XXXXX Time 46, Flow 0.13766, Mix 0
00:21:51.8	XXXXX Time 47, Flow 0.12085, Mix 0
00:21:51.8	XXXXX Time 48, Flow 0.10501, Mix 0
00:21:51.8	XXXXX Time 49, Flow 0.09018, Mix 0
00:21:51.8	XXXXX Time 50, Flow 0.07643, Mix 0
00:21:51.8	XXXXX Time 51, Flow 0.0638, Mix 0
00:21:51.8	XXXXX Time 52, Flow 0.05236, Mix 0
00:21:51.8	XXXXX Time 53, Flow 0.04215, Mix 0
00:21:51.8	XXXXX Time 54, Flow 0.03324, Mix 0
00:21:51.8	XXXXX Time 55, Flow 0.02567, Mix 0
00:21:51.8	XXXXX Time 56, Flow 0.01951, Mix 0
00:21:51.8	XXXXX Time 57, Flow 0.01481, Mix 0
00:21:51.8	XXXXX Time 58, Flow 0.01162, Mix 0
00:21:51.8	XXXXX Time 59, Flow 0.00999, Mix 0
00:21:51.8	--- Gradient is created, switching valves A and B
00:21:51.8	pump: GetSetManualValvePosition(A) --> 240
00:21:51.8	pump: GetCurrentPressure(A) --> 98.86819
00:21:51.8	pump: SetManualValvePosition(A, 240, False)
00:21:52.0	pump: GetSetManualValvePosition(B) --> 240
00:21:52.0	pump: GetCurrentPressure(B) --> 13.09802
00:21:52.0	pump: SetManualValvePosition(B, 240, False)
00:21:52.2	--- Valves A and B switched to MixTee, starting gradient
00:21:52.2	--- LoadGradient() ---
00:21:52.2	--- Loading gradient method index: 0
00:21:52.2	pump: LoadMethod(0, ZrData.ZrPumpMethod)
00:21:52.7	pump: GetMethodState(0) --> loaded
00:21:52.7	--- Set gradient start
00:21:52.7	--- StartGradient() ---
00:21:52.7	--- Starting gradient method index: 0
00:21:52.7	pump: SetMethodSignal(0, StartTrunk)
00:21:52.9	pump: GetMethodState(0) --> runningTrunk
00:21:52.9	--- Start GradientSplineFit
00:21:52.9	pump: GetMethodState(0) --> runningTrunk
00:21:53.9	pump: GetCurrentPressure(A) --> 100.4261
00:21:53.9	pump: GetCurrentPressure(B) --> 14.34038
00:21:53.9	--- GradientSplineFit is running
00:22:51.9	--- GradientSplineFit has finished
00:22:51.9	--- End GradientSplineFit
00:22:51.9	--- Finished spline flow reduction A ---

00:22:51.9	--- Finished conditioning paths ---
00:22:57.4	autosampler-none: MoveValveDrive(Valve Drive 2, 120 deg)
00:22:57.5	pump: GetSetExternalTemperature() --> 50
00:22:57.5	--- Oven temperatur: 50
00:22:57.5	--- Separator: Name: Ionoptics 25cm, Func: Separator, ColDia: 0.075 mm, Len: 250 mm, PartDia: 1.6 µm, Porosity: 42 %
00:22:57.5	--- Spline fitting time: 97.6577595902957 s
00:22:57.5	--- Spline fitting time adapted: 53.1258212171209 s
00:22:57.5	--- Press: 546.305678956798; colPress: 516.305678956798, visco: 0.00571568967517482, flow > 0.3
00:22:57.5	--- Flow: 0.3; Mix: 0.02, calcI: 217.586024730242
00:22:57.5	--- Ki calc: 217.586024730242
00:22:57.5	pump: GetSettings() --> PumpSettings
00:22:57.5	------------------------------------------------------------------
00:22:57.5	PID settings changed:
00:22:57.5	------------------------------------------------------------------
00:22:57.5	P: 200 : True; Pmin: -32000 : True; Pmax: 32000 : True
00:22:57.5	I: 600 : True; Imin: -32000 : True; Imax: 32000 : True; IWindow: 100 : True
00:22:57.5	D: 1000 : True; Dmin: -32000 : True; Dmax: 32000 : True
00:22:57.5	Result min: -32000 : True; Result max: 32000 : True
00:22:57.5	------------------------------------------------------------------
00:22:57.5	pump: SetSettings(PumpSettings)
00:22:57.5	pump: GetSettings() --> PumpSettings
00:22:57.5	------------------------------------------------------------------
00:22:57.5	PID settings changed:
00:22:57.5	------------------------------------------------------------------
00:22:57.5	P: 200 : False; Pmin: -32000 : False; Pmax: 32000 : False
00:22:57.5	I: 217 : True; Imin: -32000 : False; Imax: 32000 : False; IWindow: 100 : False
00:22:57.5	D: 1000 : False; Dmin: -32000 : False; Dmax: 32000 : False
00:22:57.5	Result min: -32000 : False; Result max: 32000 : False
00:22:57.5	------------------------------------------------------------------
00:22:57.5	pump: SetSettings(PumpSettings)
00:22:57.5	--- y = -2.5E-05x + 0.295328145530428
00:22:57.5	--- p0.Time -1, p0.Flow 0.01
00:22:57.5	--- p1.Time 0, p1.Flow 0.01
00:22:57.5	--- p2.Time 52.1258212171209, p2.Flow 0.294025
00:22:57.5	--- p3.Time 53.1258212171209, p3.Flow 0.294, p3.Mix 2
00:22:57.5	--- p4.Time 2453.12582121712, p4.Flow 0.234, p4.Mix 22
00:22:57.5	--- Strategy function end
00:22:57.5	--- y = 2.5E-05x + 0.00467185446957198
00:22:57.5	--- p0.Time -1, p0.Flow 0
00:22:57.5	--- p1.Time 0, p1.Flow 0
00:22:57.5	--- p2.Time 52.1258212171209, p2.Flow 0.005975
00:22:57.5	--- p3.Time 53.1258212171209, p3.Flow 0.006, p3.Mix 2
00:22:57.5	--- p4.Time 2453.12582121712, p4.Flow 0.066, p4.Mix 22
00:22:57.5	--- Strategy function end
00:22:57.5	xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
00:22:57.5	XXXXX Time 0, Flow 0.01, Mix 0
00:22:57.5	XXXXX Time 1, Flow 0.0106, Mix 0.10917
00:22:57.5	XXXXX Time 2, Flow 0.01179, Mix 0.29095
00:22:57.5	XXXXX Time 3, Flow 0.01353, Mix 0.50056
00:22:57.5	XXXXX Time 4, Flow 0.01581, Mix 0.70499
00:22:57.5	XXXXX Time 5, Flow 0.01861, Mix 0.88733
00:22:57.5	XXXXX Time 6, Flow 0.02189, Mix 1.04239
00:22:57.5	XXXXX Time 7, Flow 0.02564, Mix 1.17119
00:22:57.5	XXXXX Time 8, Flow 0.02983, Mix 1.27715
00:22:57.5	XXXXX Time 9, Flow 0.03444, Mix 1.3642
00:22:57.5	XXXXX Time 10, Flow 0.03945, Mix 1.43596
00:22:57.5	XXXXX Time 11, Flow 0.04482, Mix 1.49547
00:22:57.5	XXXXX Time 12, Flow 0.05055, Mix 1.54518
00:22:57.5	XXXXX Time 13, Flow 0.05661, Mix 1.58706
00:22:57.5	XXXXX Time 14, Flow 0.06297, Mix 1.62262
00:22:57.5	XXXXX Time 15, Flow 0.06961, Mix 1.65308
00:22:57.5	XXXXX Time 16, Flow 0.0765, Mix 1.67938
00:22:57.5	XXXXX Time 17, Flow 0.08363, Mix 1.70227
00:22:57.6	XXXXX Time 18, Flow 0.09097, Mix 1.72234
00:22:57.6	XXXXX Time 19, Flow 0.0985, Mix 1.74007
00:22:57.6	XXXXX Time 20, Flow 0.10619, Mix 1.75586
00:22:57.6	XXXXX Time 21, Flow 0.11402, Mix 1.77001
00:22:57.6	XXXXX Time 22, Flow 0.12197, Mix 1.78277
00:22:57.6	XXXXX Time 23, Flow 0.13001, Mix 1.79437
00:22:57.6	XXXXX Time 24, Flow 0.13813, Mix 1.80497
00:22:57.6	XXXXX Time 25, Flow 0.14629, Mix 1.81472
00:22:57.6	XXXXX Time 26, Flow 0.15448, Mix 1.82375
00:22:57.6	XXXXX Time 27, Flow 0.16267, Mix 1.83216
00:22:57.6	XXXXX Time 28, Flow 0.17084, Mix 1.84004
00:22:57.6	XXXXX Time 29, Flow 0.17896, Mix 1.84747
00:22:57.6	XXXXX Time 30, Flow 0.18701, Mix 1.85451
00:22:57.6	XXXXX Time 31, Flow 0.19497, Mix 1.86122
00:22:57.6	XXXXX Time 32, Flow 0.20282, Mix 1.86766
00:22:57.6	XXXXX Time 33, Flow 0.21053, Mix 1.87386
00:22:57.6	XXXXX Time 34, Flow 0.21808, Mix 1.87988
00:22:57.6	XXXXX Time 35, Flow 0.22545, Mix 1.88574
00:22:57.6	XXXXX Time 36, Flow 0.2326, Mix 1.89148
00:22:57.6	XXXXX Time 37, Flow 0.23953, Mix 1.89713
00:22:57.6	XXXXX Time 38, Flow 0.2462, Mix 1.90273
00:22:57.6	XXXXX Time 39, Flow 0.2526, Mix 1.9083
00:22:57.6	XXXXX Time 40, Flow 0.25869, Mix 1.91386
00:22:57.6	XXXXX Time 41, Flow 0.26446, Mix 1.91945
00:22:57.6	XXXXX Time 42, Flow 0.26989, Mix 1.92509
00:22:57.6	XXXXX Time 43, Flow 0.27494, Mix 1.93081
00:22:57.6	XXXXX Time 44, Flow 0.2796, Mix 1.93663
00:22:57.6	XXXXX Time 45, Flow 0.28385, Mix 1.94258
00:22:57.6	XXXXX Time 46, Flow 0.28765, Mix 1.94869
00:22:57.6	XXXXX Time 47, Flow 0.291, Mix 1.95499
00:22:57.6	XXXXX Time 48, Flow 0.29385, Mix 1.96152
00:22:57.6	XXXXX Time 49, Flow 0.2962, Mix 1.9683
00:22:57.6	XXXXX Time 50, Flow 0.29801, Mix 1.97539
00:22:57.6	XXXXX Time 51, Flow 0.29927, Mix 1.98282
00:22:57.6	XXXXX Time 52, Flow 0.29995, Mix 1.99065
00:22:57.6	XXXXX Time 53, Flow 0.30003, Mix 1.99892
00:22:57.6	--- Gradient is created, switching valves A and B
00:22:57.6	pump: GetSetManualValvePosition(A) --> 240
00:22:57.6	pump: GetCurrentPressure(A) --> 1.076707
00:22:57.6	pump: SetManualValvePosition(A, 240, False)
00:22:57.8	pump: GetSetManualValvePosition(B) --> 240
00:22:57.8	pump: GetCurrentPressure(B) --> 0.06310238
00:22:57.8	pump: SetManualValvePosition(B, 240, False)
00:22:58.0	--- Valves A and B switched to MixTee, starting gradient
00:22:58.0	--- LoadGradient() ---
00:22:58.0	--- Loading gradient method index: 0
00:22:58.0	pump: LoadMethod(0, ZrData.ZrPumpMethod)
00:22:58.5	pump: GetMethodState(0) --> loaded
00:22:58.5	--- Set gradient start
00:22:58.5	--- StartGradient() ---
00:22:58.5	--- Starting gradient method index: 0
00:22:58.5	pump: SetMethodSignal(0, StartTrunk)
00:22:58.7	pump: GetMethodState(0) --> runningTrunk
00:22:58.7	--- Start GradientSplineFit
00:22:58.7	pump: GetMethodState(0) --> runningTrunk
00:22:59.7	pump: GetCurrentPressure(A) --> 2.950108
00:22:59.7	pump: GetCurrentPressure(B) --> 1.916782
00:22:59.7	--- GradientSplineFit is running
00:23:51.7	--- GradientSplineFit has finished
00:23:51.7	--- End GradientSplineFit
00:23:51.7	status: RemoveStatus(preparing gradient start)
00:23:51.8	Setting signal "lc-ready"
00:23:51.8	Waiting for signal "ms-start"...
00:23:51.8	--- LoadGradient() ---
00:23:51.8	--- Loading gradient method index: 0
00:23:51.8	pump: LoadMethod(0, ZrData.ZrPumpMethod)
00:23:52.3	pump: GetMethodState(0) --> loaded
00:23:52.3	--- Set gradient start
00:23:52.3	--- StartGradient() ---
00:23:52.3	--- Starting gradient method index: 0
00:23:52.3	pump: SetMethodSignal(0, StartTrunk)
00:23:52.5	pump: GetMethodState(0) --> runningTrunk
00:23:52.6	autosampler-none: SetSignal(Output Signal 1)
00:23:52.6	status: SetStatus(wash, )
00:23:55.9	status: SetStatus(elution, )
00:23:57.6	autosampler-left: MoveToObject(LCInjector1)
00:24:00.4	autosampler-left: PenetrateWithConstForce(LCInjector1)
00:24:00.5	autosampler-left: MoveValveDrive(Valve Drive 1, 0 deg)
00:24:29.8	autosampler-left: CleanInjector(LCInjector1, LCP 1, 100 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 2, False)
00:26:00.0	autosampler-left: CleanInjector(LCInjector1, LCP 1, 300 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 1, True)
00:26:00.1	autosampler-left: MoveValveDrive(Valve Drive 1, 60 deg)
00:26:03.0	autosampler-left: MoveToHome()
01:23:53.6	Setting signal "lc-done"
01:23:53.6	status: RemoveStatus(elution)
01:23:53.6	status: RemoveStatus(wash)
01:23:53.6	pump: GetCurrentPressure(A) --> 331.5642
01:23:53.6	pump: GetCurrentPressure(B) --> 335.1848
01:23:53.6	pump: GetSettings() --> PumpSettings
01:23:53.6	pump: GetSetManualValvePosition(A) --> 240
01:23:53.6	pump: GetSetManualValvePosition(B) --> 240
01:23:53.6	-------------------------------------------------------
01:23:53.6	--- Reduce pressure ---
01:23:53.6	-------------------------------------------------------
01:23:53.6	--- Pressure channel A: 331.564178466797
01:23:53.6	--- Pressure channel B: 335.184783935547
01:23:53.6	pump: GetSettings() --> PumpSettings
01:23:53.6	------------------------------------------------------------------
01:23:53.6	PID settings changed:
01:23:53.6	------------------------------------------------------------------
01:23:53.6	P: 250 : True; Pmin: -5500 : True; Pmax: 32000 : True
01:23:53.6	I: 50 : True; Imin: -20000 : True; Imax: 20000 : True; IWindow: 50 : True
01:23:53.6	D: 1500 : True; Dmin: -10000 : True; Dmax: 10000 : True
01:23:53.6	Result min: -32000 : True; Result max: 32000 : True
01:23:53.6	------------------------------------------------------------------
01:23:53.6	pump: SetSettings(PumpSettings)
01:23:53.9	--- Set pressure channel A:          10
01:23:53.9	--- Set pressure channel B:          5
01:23:53.9	--- Reduce pressure flow controlled: True
01:24:37.4	--------------------------------------------------------
01:24:37.4	--- Log PID parameter called from: reducePressure
01:24:37.4	--------------------------------------------------------
01:24:37.4	--- P: 200; Pmin: -32000; Pmax: 32000
01:24:37.4	--- I: 217; Imin: -32000; Imax: 32000; IWindow: 100
01:24:37.4	--- D: 1000; Dmin: -32000; Dmax: 32000
01:24:37.4	--- Result min: -32000; Result max: 32000
01:24:37.4	--------------------------------------------------------
01:24:37.4	--------------------------------------------------------
01:24:37.4	--- Log instrument settings called from: reducePressure
01:24:37.4	--------------------------------------------------------
01:24:37.4	--- HomeSpeed: 2000; PurgeSpeed: 2000
01:24:37.4	--- PressureTrackingExcessFactor: 96
01:24:37.4	--- FlowResistanceA: 300; FlowResistanceB: 100; FlowResistanceOut: 150
01:24:37.4	--- FC_FlowFilterDepth: 5; FC_PressureFilterDepth: 0
01:24:37.4	--- PC_OutputFilterDepth: 0
01:24:37.4	--- CompressibilityFactorB: 2.29999995231628; PressurePIDNegativeResultDivisor: 1
01:24:37.4	--- ExternalZeroPressureOffsetA: 124.007247924805; ExternalZeroPressureOffsetB: 130.798812866211
01:24:37.4	--- ExternalPressureScalingFactorA: 0.0197199992835522; ExternalPressureScalingFactorB: 0.0197199992835522
01:24:37.4	--------------------------------------------------------
01:24:37.4	--- Final pressure channel A: 4.96154737472534
01:24:37.4	--- Final pressure channel B: 4.79590225219727
01:24:37.4	-------------------------------------------------------
01:24:37.4	-------------------------------------------------------
01:24:37.4	--- Extended Wash:
01:24:37.4	-------------------------------------------------------
01:24:37.4	status: SetStatus(clean injector, )
01:24:38.0	autosampler-left: MoveValveDrive(Valve Drive 2, 0 deg)
01:24:38.0	pump: GetPistonPosition(A) --> 32.0647701386193
01:24:38.0	pump: GetPistonPosition(B) --> 67.054572477241
01:24:38.0	-------------------------------------------------------
01:24:38.0	--- Optional Refill of Pump Heads:
01:24:38.0	--- initiated by channel A:     False, B: False
01:24:38.0	pump: GetPistonPosition(A) --> 32.0647701386193
01:24:38.0	pump: GetPistonPosition(B) --> 67.054572477241
01:24:38.0	--- Piston position channel A:  32.0647701386193, B: 67.054572477241
01:24:38.0	-------------------------------------------------------
01:24:38.0	pump: SetDigitalOutput(PO2, False)
01:24:38.0	pump: SetManualValvePosition(A, 0, False)
01:24:38.8	pump: Manualmode_Pump_constantPressure(A, 400)
01:24:38.8	pump: GetTargetPressure(A) --> 400
01:24:38.8	--- Clean injector with organic
01:24:39.1	autosampler-left: MoveValveDrive(Valve Drive 2, 300 deg)
01:24:39.3	autosampler-left: MoveValveDrive(Valve Drive 1, 0 deg)
01:25:15.2	autosampler-left: CleanInjector(LCInjector1, LCP 1, 100 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 2, False)
01:25:15.3	autosampler-left: MoveValveDrive(Valve Drive 1, 60 deg)
01:25:16.4	--- Prime with organic volume: 10
01:25:16.4	pump: GetPistonPosition(A) --> 95.8476880264119
01:25:34.3	pump: GetPistonPosition(A) --> 105.902460033981
01:25:34.3	--- Clean injector with aqueous
01:25:34.4	autosampler-left: MoveValveDrive(Valve Drive 1, 0 deg)
01:26:33.1	autosampler-left: CleanInjector(LCInjector1, LCP 1, 200 uL, 0 mm, 5 uL/s, 5 s, 20 mm, 40 uL/s, 1 s, 1, False)
01:26:33.2	autosampler-left: MoveValveDrive(Valve Drive 1, 60 deg)
01:26:34.4	--- Prime with aqueous volume: 40
01:26:34.4	pump: GetPistonPosition(A) --> 134.005681836424
01:28:00.8	pump: GetPistonPosition(A) --> 174.045489645936
01:28:00.8	status: RemoveStatus(clean injector)
01:28:03.0	autosampler-left: LeaveObject()
01:28:03.0	pump: Manualmode_Pump_constantSpeed(A, 0)
01:28:03.0	pump: GetSetPistonSpeed(A) --> 0
01:28:03.0	pump: Manualmode_Pump_constantSpeed(B, 0)
01:28:03.0	pump: GetSetPistonSpeed(B) --> 0
01:28:03.0	pump: IsIdle() --> False
01:28:03.1	autosampler-left: MoveValveDrive(Valve Drive 1, 60 deg)
01:28:07.0	autosampler-left: MoveToHome()
01:28:07.0	pump: IsIdle() --> True
01:28:07.0	COMPLETED
